Lindr · Kontakt 70 · 2 taps · CO2
Lindr Kontakt 70 portable dispenser for two drinks with high performance
The Lindr Kontakt 70 is a portable dry cooler with 2 taps and 70 l/h continuous output, designed to serve beer and other cold beverages with professional performance, compact format and 3/8 quick connection in environments such as events, temporary bars and light hospitality.
Este modelo does not include an integrated air compressor. To operate correctly it needs compatible coupler or couplers and a external pressure source adapted to the installation.
What this product offers
The Lindr Kontakt 70 is a clear step above compact coolers aimed at home use or small events. Lindr presents it as a machine for anyone who needs high performance in a portable cooler, capable of serving up to 140–180 perfectly chilled drinks per hour according to the manufacturer, while keeping transportable dimensions and a reasonably agile setup logic.
Its proposition fits particularly well in restaurants, bars, small festivals, pop‑up bars, catering, temporary bars, large‑format garden parties, professional events and light hospitality. The two‑tap version allows you to work with two independent drinks, which is very useful when you need two products or a more flexible service flow.
Technically, it combines a continuous output of 70 l/h, a maximum of 90 l/h, a cooling block with 1.2 litres of beverage, a continuously adjustable thermostat, taps with compensator and a fully stainless-steel structure. Install Beer also supplies it with 4 metres of beer tubing (2 + 2) and the necessary John Guest connectors to make start-up easier.
Continuous performance
70 l/h para servicio estable en dos líneas.
Capacidad máxima
90 l/h a 0 °C / TK 45 °C.
Settings
2 grifos y 2 bebidas frías independientes.
Integrated compressor
No; requiere presión externa compatible.
Beverage connection
Speedfit 9,5 mm (3/8").
Cooling block
1,2 litros de bebida en el bloque de refrigeración.
Format
27 kg portable unit with top handles.
Dato importante
It can be set up with 1 or 2 kegs and run on CO₂ or an external compressor according to the installation layout.
Main features
2 grifos para 2 bebidas frías
It allows you to work with two independent lines in a single unit, ideal for two products and greater serving flexibility.
70 l/h continuos y 90 l/h máximos
A clearly professional range to handle intense service in a temporary bar, event or small venue.
Cold beer in 5–8 minutes
The current Install Beer spec sheet indicates cold beverage ready in the thermal block a few minutes after switching on.
Bloque térmico de 1,2 litros
It provides thermal stability and helps maintain good flow and consistent service.
Taps with compensator
The manufacturer highlights continuous flow control, useful for fine-tuning service and beverage behaviour.
Conectores rápidos 3/8
They speed up assembly and disassembly of beverage lines in portable or temporary setups.
Continuously adjustable thermostat
Permite ajustar de forma precisa la temperatura de servicio según bebida, entorno y ritmo de trabajo.
Green Line with R290
Uses R290 refrigerant within Lindr’s Green Line architecture.
Estructura inox robusta
The chassis and coils are made of stainless steel, with a hygienic focus and long service life.
Technical specifications
Confirmed technical data for the Lindr Kontakt 70
| Specification |
Detalle confirmado |
| Brand |
Lindr |
| Model |
KONTAKT 70 NEW GREEN LINE |
| SKU |
PK0169 |
| MPN |
KCH 01629 |
| Equipment type |
Portable dry beer and beverage dispenser / cooler, 2 taps |
| Number of taps |
2 |
| Número de bebidas frías |
2 |
| Capacidad máxima |
90 l/h |
| Continuous performance |
70 l/h |
| Gradiente térmico ΔT |
10 °C |
| Potencia del compresor |
1/3 HP · 860 W |
| Potencia eléctrica |
483 W |
| Intensidad |
2.10 A |
| Power supply |
220-240V 50Hz~1 |
| Compresor de aire integrado |
No |
| Presión de aire integrada |
No aplica |
| Longitud de serpentines |
2 x 14,0 m |
| Diámetro del serpentín |
7 x 8 mm |
| Volumen de bebida en el bloque térmico |
1.2 l |
| Beverage connection |
Speedfit 9.5 mm (3/8") |
| Conexión de aire |
No integrada en el equipo base |
| Dimensiones aproximadas |
493 x 240 x 444 mm according to the commercial technical drawing |
| Net weight |
27.0 kg |
| Materials |
Estructura completa y serpentines en acero inoxidable |
| Refrigerant |
R290 |
| Finish |
Inox / Green Line |
| Contenido del suministro estándar |
Termostato, grifos, llave de grifo, bandeja de goteo y speed fittings. Install Beer añade 4 m de tubo de cerveza (2 + 2) y conectores John Guest necesarios. |
| Opciones personalizables |
Choice of tap, stainless-steel threaded beverage connection and power-cable plug. The manufacturer indicates that the platform can be supplied with a single tap and a longer coil. |
| General compatibility |
3/8" beverage line, compatible keg coupler(s) and an external pressure system using CO₂ or an air compressor depending on the installation |
| Certification / regulations |
El fabricante indica cumplimiento de los últimos estándares de seguridad e higiene checos y europeos |
Compatibility and use cases
The Kontakt 70 uses a 3/8" beverage outlet and is designed to serve two independent cold drinks. As it does not include an integrated air compressor, pressure must be provided externally. Install Beer’s quick schematic covers configurations for 1 keg or 2 kegs, using either an external air compressor or CO₂, so the machine can be adapted to portable setups or temporary bars of varying complexity.
In practice, the system consists of unit + 3/8 tubing + correct coupler or couplers + external pressure source + keg or kegs. If you are going to work with two products, it is important to check very carefully the coupler compatibility and the behaviour of each beverage so that both lines perform stably.
Its natural scenarios are restaurants, bars, small festivals, pop-up mobile bars, catering, temporary bars, tastings, professional events and light hospitality. It can also fit into a demanding home environment when you are looking for a machine clearly superior to a compact range.
Installation and considerations before buying
-
Confirma si trabajarás con 1 o 2 barriles: la máquina permite ambas configuraciones, pero cambian el esquema y los accesorios necesarios.
-
Check the correct keg coupler(s): each keg needs the extractor head that is compatible with its valve and system.
-
Remember it does not have a built‑in compressor: you must decide whether the installation will run on CO₂ or on an external air compressor.
-
Check the line size: the beverage outlet is 3/8", so it is advisable to check tubing, fittings and adapters before installation.
-
Insertion into quick connector: the Install Beer diagram shows an approximate insertion of 20 mm of tubing into the quick connector for a correct coupling.
-
Check the available space: although it’s still portable, this is a high-performance unit that requires a stable surface and space for ventilation and hose routing.
-
Power supply: requires a 220–240 V 50 Hz~1 outlet and a safe electrical installation.
-
Type of use: if service is going to be very intensive or permanent, it’s worth considering whether this portable range is the most suitable or whether a fixed installation or higher-capacity solution would be better.
Recommended maintenance and use
En un equipo de dos líneas y alto caudal, el rendimiento real depende de limpieza de líneas, estado de cabezales, presión correcta, ventilación, temperatura y estado de conectores y grifos. Cualquier desequilibrio entre circuitos puede afectar al servicio, al caudal y a la calidad final de la bebida.
It is also advisable to keep the ventilation area clean and always follow the manufacturer’s instructions for use and maintenance of the refrigeration circuit, since the unit works with R290. If it is used frequently at events or in professional service, it is recommended to establish a clear routine for cleaning, checking seals and inspecting quick connections.
Frequently asked questions
Does the Lindr Kontakt 70 have an integrated air compressor?
No. The manufacturer states that the Kontakt 70 NEW GREEN LINE does not include an air compressor, so pressure must be provided externally with CO₂ or a compatible compressor.
¿Cuántos grifos y cuántas bebidas puede servir?
La configuración habitual de esta ficha trabaja con 2 grifos y 2 bebidas frías, lo que permite servir dos líneas independientes.
¿Qué necesito para ponerlo en marcha?
You need the unit, compatible tubing, the correct coupler or couplers, keg or kegs and an external pressure source. Install Beer adds 4 metres of beer line and the necessary John Guest connectors.
¿Se puede conectar con 1 barril o con 2 barriles?
Yes. The quick diagram provided by Install Beer shows configurations for 1 keg or 2 kegs, with either an external air compressor or CO₂.
¿En cuánto tiempo enfría la bebida?
The current Install Beer datasheet indicates cold beer ready in the thermal block approximately 5–8 minutes after switching on.
¿También sirve para otras bebidas además de cerveza?
Yes, the manufacturer mentions beer and other beverages. Even so, before purchasing it is worth checking pressure, circuit, product and cleaning compatibility for the specific beverage.
You may also be interested in
