Abrazadera de acero inoxidable-Install Beer

Stainless steel one-ear clamp for dispensing tube

70 (range 5.8 mm to 7 mm)
0.25€ EUR (0.30€ EUR IVA incl.)
Skip directly to product information
Abrazadera de acero inoxidable-Install Beer
Stainless steel one-ear clamp for dispensing tube

Stainless steel one-ear clamp for dispensing tube

IB0728
0.25€ EUR (0.30€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

Stainless steel one-ear clamp for dispensing tube

70 (range 5.8 mm to 7 mm)

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656

Technical accessory for beverage dispensing

Stainless steel clamp to securely fasten dispensing tubes

The one-ear stainless steel clamp for dispensing tube is used to secure hoses and tubes to barbs or connectors with a secure, hygienic and corrosion-resistant closure in draft beer and other tap beverage installations.

What this product offers

This stainless clamp is designed to secure joints between tube and connector in beverage dispensing circuits. Its main function is to provide mechanical fastening, stability and reduced leak risk at critical points in the assembly.

In beer, water, wine, cocktail, kombucha, cider or nitro coffee installations, a well-chosen clamp affects circuit safety, service cleanliness and overall durability. Stainless steel also helps in humid environments and with frequent cleaning.

It is a useful solution for new setups as well as for maintenance, replacement of consumables or line adjustment in bars, restaurants, breweries, hotels, offices and homes with compatible dispensing systems.

Key data

SKU IB0001, IB0002, IB0003, IB0004, IB0005, IB0006, IB0007, IB0008, IB0009, IB0010, IB0011, IB0012, IB0013, IB0014, IB0015, IB0016, IB0695, IB0728, IB0728 and IB0820 Referencia comercial del producto en Install Beer.
Material Stainless steel Corrosion‑resistant and suitable for damp environments and frequent cleaning.
Format Single ear Visually controllable closure for even tightening.
Size range From 70 to 346 Available in multiple sizes for different tube diameters and applications.
Use Securing tube to barb or connector Designed for beverage dispensing circuits.
Setup Fast and simple The data sheet itself indicates installation without special tools, using pliers.
Important: before buying, it is advisable to check the actual outside diameter of the tube and the type of barb or connection point. Choosing the wrong size can cause leaks, tube deformation or an insufficient seal.

Main features

  • Corrosion‑resistant stainless steel Designed to work in damp environments with regular exposure to cleaning and condensation.
  • Single‑ear design Allows visual control of the closure and makes it easier to apply even tightening.
  • Narrow band Promotes a concentrated transfer of clamping force and reduces weight.
  • Uniform compression The sheet specifies stepless 360° closure for homogeneous radial and surface compression.
  • Mounting notch Helps quick and easy installation and increases clamping force.
  • Inner radial guide Contributes to a uniform, effective and durable seal.
  • Adjustable radial pressure Reduces the risk of damaging the clamped parts when the correct size is chosen.
  • Wide range of sizes Available for small tubes, standard beverage lines, crystal tube, silicone, braided and larger-diameter applications.

Technical specifications

Technical data sheet of the stainless steel clamp for dispensing tube according to published data.
Property Detail
Product Stainless steel clamp for tube
Described version Single-ear stainless steel clamp for beverage dispensing
SKU IB0001, IB0002, IB0003, IB0004, IB0005, IB0006, IB0007, IB0008, IB0009, IB0010, IB0011, IB0012, IB0013, IB0014, IB0015, IB0016, IB0695, IB0728, IB0728 and IB0820
Equipment type Fastening accessory for dispensing tubes and hoses
Material Stainless steel
Closure format Single ear
Band design Narrow band
Compression Uniform, radial and surface‑wide
Mounting notch Yes, for quick installation and increased clamping force
Inner guide Inner band with radial guide
Setup Quick and simple; the data sheet indicates the use of pincers
Key dimensions 70, 87, 95, 113, 118, 123, 133, 138, 140, 145, 162, 170, 301, 316 and 346
Application To secure a tube or hose to a connector, barb or connection point
General compatibility Dispensing systems for beer, wine, water, cocktails, vermouth, kombucha, cider and nitro coffee
Scope of supply Clamp according to selected size

Size chart and usage recommendations

This table helps you choose the right stainless clamp according to tube diameter, hose type or specific application. It is especially useful for reducing purchasing errors, improving real compatibility and enabling a safer, cleaner dispensing installation.

Equivalence between clamp size and recommended use in tubes and dispensing applications.
Clamp size Usage recommendation
Clamp 70 6 mm and 1/4" tube
Clamp 87 7 mm tube
Clamp 95 8 mm and 5/16" tube
Clamp 113 3/8" (9.5 mm) tube and 10 mm tube
Clamp 118 Crystal tube 7x10 mm and contact python (1 and 2)
Clamp 123 12 mm tube
Clamp 133 Clear tube 8x12 mm
Clamp 138 1/2" tube and contact python (3 or more tubes)
Clamp 140 Braided pressure hose
Clamp 145 Silicone and drain tube 10 x 14 mm
Clamp 162 Crystal tube 12x16 mm
Clamp 170 Bag-in-Box tube
Clamp 301 Bath python and tubes over 27 mm
Clamp 316 Tubes over 29 mm
Clamp 346 Tubes over 32 mm
Technical recommendation: this table serves as a quick‑selection guide, but in critical installations it is advisable to measure the actual outer diameter of the tube once mounted on the barb or connector to ensure proper closure.

Compatibility and use cases

Technical compatibility

This clamp is used to fasten tube or hose onto barbs, connectors and junction points in dispensing systems. Actual compatibility depends on the combination of the tube’s outside diameter, the size of the barb and the clamp size chosen.

The published recommendations include applications on 6 mm, 7 mm, 8 mm, 3/8", 10 mm, 12 mm, 1/2" tube, crystal tube 7x10 mm, 8x12 mm and 12x16 mm, silicone tube and 10x14 mm drain, braided pressure tube, Bag in Box tube, contact python and bath python.

Escenarios habituales

It is a useful accessory in bars, restaurants, breweries, hotels, events, offices, and homes with tap beverage dispensing systems.

It can be used in beer lines, treated or filtered water, wine, vermouth, cocktails, kombucha, cider and nitro coffee, as long as the chosen size matches the actual tube and fixing point.

Practical tip: if you are unsure between two sizes, it is advisable to measure the outer diameter of the tube already mounted on the barb or to check the exact reference of the tube and connector before ordering the clamp.

Installation and considerations before buying

  • Check the actual outside diameter of the tube or tube + barb assembly before choosing the size.
  • Check whether the tube is 6 mm, 7 mm, 8 mm, 10 mm, 12 mm, 1/4", 5/16", 3/8", 1/2", clear, silicone, braided or Bag in Box.
  • Check whether the connection works with contact python, bath python or a standard barb.
  • Installation is carried out by closing the ear with pliers; it is advisable to avoid incorrect or distorted tightening.
  • A clamp that is too small can damage the tube or not fit; one that is too large may not seal properly.
  • After assembly, it is advisable to check for leaks, circuit pressure and the general condition of the tube.
  • In beverage lines, a poorly secured joint can affect hygiene, system safety and service continuity.

Recommended maintenance and use

The clamp does not require complex maintenance, but the joint should be checked periodically. In dispensing installations it is advisable to inspect the condition of the tube, its seating on the barb and any possible play, surface corrosion or deformation due to repeated disassembly.

Whenever a tube is replaced, a line is rebuilt or leaks appear, it is advisable to also check the clamp. In intensive work environments or where cleaning is frequent, replacing consumables in time helps keep the installation safer and more hygienic.

Frequently asked questions

What is this single‑ear stainless clamp used for?

It is used to securely fasten a tube or hose onto a barb or connector within a beverage dispensing system.

How do I choose the right size?

You must check the outer diameter of the tube or of the assembly mounted on the barb and compare it with the recommended size for each application.

Is it suitable for beer and other beverages?

Yes. The product sheet presents it for beer systems and other tap‑dispensed drinks such as water, wine, cocktails, vermouth, kombucha, cider and nitro coffee.

What tool do I need to install it?

The sheet specifies easy installation with no special tools, using pincers to close the ear.

What happens if I choose the wrong size?

You may get leaks, an insufficient seal or even damage the tube. That’s why it’s important to carefully check the diameter and application before buying.

Is it suitable for professional and home lines?

Yes. It can be used both in professional installations and in compatible domestic equipment, as long as the size is correct.

You may also be interested in

Tubes for dispensing beverages Connectors and fittings for dispensing Dispensing gaskets Dispensing tools Technical service

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Essential accessories

You might also be interested in

Frequently asked product questions
Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.
What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.
Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.
What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.
Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.
How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.
What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.
Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.
How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.
Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.