Skip directly to product information
Tubo Lupulus II-Install Beer
  • Tubo Lupulus II-Install Beer
  • Tubo Lupulus II-Install Beer
Lupulus II Tube

Lupulus II Tube

IB0561
1.76€ EUR (2.12€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

Lupulus II Tube

3/8'' (6.7 x 9.5mm)

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Lupulus II tube for dispensing beer and other chilled beverages

Sold by the meter (each unit represents one meter)

Outer size: 3/8" (9.5x6.7mm), 5/16" (8x4mm), 3/16" (4.8x3.7mm) and 1/4 (4.3x6.35mm).

The full coil of tubing is 100 metres (100 units).

The Lupulus II tube, with its dual-layer design and transparency, is perfect for dispensing chilled beer and beverages. It offers high resistance to pressure and chemicals, maintaining the drink’s temperature and flavor. Ideal for professional and home environments, its flexibility and long life ensure efficient, consistent dispensing.

Dual‑layer tubing whose inner wall has minimal roughness and practically no migration. Very good flexibility, long life and resistance to high pressures and various chemical agents. Specially designed for soft drink and beer dispensers.

Suitable for beverage treatment and the food industry in general, where high safety pressure and mechanical strength are required. Ideal for transferring liquids with high acidity and alcohol (up to 15%).

Maximum pressure up to 18 bar

Maximum temperatures from -10º to 70º

  • It has a pressure resistance of up to 33.8 BAR.
  • Withstands temperatures up to 70ºC.
  • Good flexibility and bending radius.
  • High longevity.
  • Low roughness on the inner wall so it gets dirty less easily.
  • Gas and flavor impermeability.
  • Compatible with quick-connect fittings.
  • Twin-wall tube.
  • Transparent.
  • Low migration, low-porosity material. Chemical resistance to many products.

The choice of excellence for dispensing beer and other chilled beverages in both professional and domestic environments. This tube has been manufactured with the highest-quality materials, ensuring durability and wear resistance, two crucial attributes in the hospitality industry and home entertainment.

The most outstanding feature of the Lupulus II Tube is its ability to maintain the beverage at the optimal temperature during dispensing. This is crucial to ensure that beer or any other drink retains its ideal flavor and texture from the keg or any other container to the chilled tap.

In addition, its optimal flow design ensures efficient and even dispensing, which is essential in high‑volume environments such as bars, restaurants, and breweries. Its versatility also makes it ideal for enthusiasts seeking a high‑quality dispensing experience in the comfort of their home.

You might also like

Frequently asked questions
Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.
What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.
Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.
What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.
Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.
How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.
What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.
Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.
How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.
Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.