Type U DSI keg coupler with 2 lugs
Pickup available at Install Beer S.L.
Usually ready in 4 hours
DSI keg coupler type U · 2 lugs
Dispense coupler for kegs fitted with the specified valve.
Choosing a variant
| Variant | What’s included |
|---|---|
| Head only IB0134 | Coupler only |
| Pack with 3/8" John Guest fittings PK0095 | Coupler and John Guest fittings for 3/8″ tubing |
| DeLuxe pack with 3/8" John Guest PK0096 | Coupler, brass John Guest fittings and protective springs for 3/8″ tubing |
Compatibility
Two-lug UEC system, compatible with Guinness kegs fitted with this valve.
Installation
With the lever raised, place the coupler on the valve, turn it until secure, then press the lever down until it locks.
Good practice
The coupler can be dismantled for cleaning and maintenance. Metal hose tails are sold separately.
DSI recommends sanitising the mating face at each keg change and dismantling the coupler for a full clean weekly when the keg is refrigerated. Clean more often if the keg is stored somewhere warm.
Tools and documentation
Frequently asked questions
Does it fit Guinness?
Yes, with Guinness kegs that have a two-lug U valve.
Which measurements should I check before choosing fittings?
Check the threads of both connections and the tubing outside diameter. The John Guest packs on this page are for 3/8″ tubing.
Technical information
BSP threads on the coupler offered: 1/2″ × 1/2″ · 2 lugs.
Metal body with stainless-steel components, EPDM seals and check valves for gas and beverage.
Useful accessories and add-ons
Check the correct connections and sizes.
Technical information
Information to choose, install and maintain this product
Compatibility
Technical specifications
Select a variant to see its technical specifications.
- Tube size
- Thread
- Gas inlet 1/2″ BSP and beverage outlet 1/2″ BSP
- Connection
- Type U keg coupler (2 lugs)
- Pressure
- Temperature
- Dimensions
Installation and commissioning
Maintenance
DSI recommends sanitising the coupling face at every keg change and dismantling the coupler for a thorough clean every week if the keg is refrigerated. Shorten the interval if the keg is stored in a warm place.
Product FAQs
Yes, it fits Guinness kegs with a two-lug U-type valve.
What size should I check before choosing the fittings?
Check the thread on both connections and the outside diameter of the tube. The John Guest kits on this page are for 3/8″ tubing.