Type S DSI coupler

Type S DSI coupler

Head only
40.59€ excl. VAT 49.11€ VAT incl.
Skip directly to product information
Type S DSI coupler

Type S DSI coupler

IB0132
40.59€ excl. VAT 49.11€ VAT incl.
VAT depends on destination: mainland Spain and Balearic Islands 21%; Canary Islands are outside EU VAT. Final tax is calculated from the delivery address at checkout.
Shipping calculated at checkout.
Model
Shipping information Request technical advice

Pickup available at Install Beer S.L.

Usually ready in 4 hours

View store information

Type S DSI coupler

Head only

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
Barcelona
Spain

+34933464656

DSI keg coupler type S

Dispense coupler for kegs fitted with the specified valve.

Choosing a variant

VariantWhat’s included
Head only
IB0132
Coupler only
Pack with 3/8" John Guest fittings
PK0088
Coupler and John Guest fittings for 3/8″ tubing
DeLuxe pack with 3/8" John Guest
PK0089
Coupler, brass John Guest fittings and protective springs for 3/8″ tubing

Compatibility

DSI identifies this system as Well type (European Sankey).

Brand examples: Cruzcampo, Heineken, Amstel. Check the keg valve type before ordering. The brand alone does not establish compatibility.

Installation

With the lever raised, place the coupler on the valve, turn it until secure, then press the lever down until it locks.

Good practice

The coupler can be dismantled for cleaning and maintenance. Metal hose tails are sold separately.

DSI recommends sanitising the mating face at each keg change and dismantling the coupler for a full clean weekly when the keg is refrigerated. Clean more often if the keg is stored somewhere warm.

Tools and documentation

Frequently asked questions

Which measurements should I check before choosing fittings?

Check the threads of both connections and the tubing outside diameter. The John Guest packs on this page are for 3/8″ tubing.

Technical information

BSP threads on the coupler offered: 1/2″ × 1/2″ · 2 lugs.

Metal body with stainless-steel components, EPDM seals and check valves for gas and beverage.

Useful accessories and add-ons

Check the correct connections and sizes.

Technical information

Information to choose, install and maintain this product

Keg coupler for kegs fitted with the specified valve.
Compatibility
DSI identifies this system as Well type (European Sankey).
Brand examples: Cruzcampo, Heineken, Amstel. Check the keg valve type before ordering. The brand alone does not establish compatibility.
Technical specifications
Thread
Gas inlet 1/2″ BSP and beverage outlet 1/2″ BSP
Connection
Type S keg coupler (European Sankey, 2 lugs)
Installation and commissioning
With the lever raised, place the coupler on the valve, turn it until secure, then lower the lever until it locks into place.
Maintenance
The keg coupler can be dismantled for cleaning and maintenance. Metal hose barbs are sold separately.
DSI recommends sanitising the coupling face at every keg change and dismantling the coupler for a thorough weekly clean if the keg is refrigerated. Shorten the interval if the keg is stored in a warm place.
The DSI manual specifies brush 550396 for the body and piston. After brushing, rinse the parts with clean water and inspect the seals.
Product FAQs
What should I measure before choosing fittings? Check the thread on both connections and the outside diameter of the tube. The John Guest kits on this page are for 3/8″ tubing.