Barrilero refrigerado compacto para 2 barriles 20L - Install Beer

EFCOLD SFK-2E+ | Compact refrigerated keg cooler for 2 x 20 L kegs

3,626.00€ EUR (4,387.46€ EUR IVA incl.)
Skip directly to product information
Barrilero refrigerado compacto para 2 barriles 20L - Install Beer
EFCOLD SFK-2E+ | Compact refrigerated keg cooler for 2 x 20 L kegs

EFCOLD SFK-2E+ | Compact refrigerated keg cooler for 2 x 20 L kegs

SFK-2E+
3,626.00€ EUR (4,387.46€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

EFCOLD SFK-2E+ | Compact refrigerated keg cooler for 2 x 20 L kegs

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656
Draft beer · Undercounter

Compact refrigerated keg cooler for 2 x 20-litre kegs for undercounter installation

The TEFCOLD SFK-2E+ is a compact refrigerated keg cooler for 2 x 20-litre kegs, with fan-assisted cooling, electronic control and a removable unit to make maintenance easier in professional bar environments.

What this compact refrigerated keg cooler offers

The TEFCOLD SFK-2E+ is designed for bars, restaurants and service points that need to work with chilled kegs without dedicating too much space to refrigeration. Its compact format is particularly suitable for undercounter installations or as a support unit in small and medium-sized bars.

Its main advantage is combining a small footprint with a professional approach: fan-assisted cooling, electronic thermostat, LED interior light, reinforced base plate and removable refrigeration unit. This helps maintain stable operation and simplifies technical interventions when service cannot be stopped for long.

In addition, by placing the keg close to the point of service, the beer lines can be shorter. This allows a more controlled installation and can help minimise foam issues in daily service.

Key data

Model SFK-2E+
Capacity 2 x 20 L
Temperatura +2 a +10 ºC
Volumen neto 95 l
Refrigeration Ventilada / forzada
Unidad de máquina Derecha
Importante: is an undercounter refrigerated keg cooler. For correct operation, leave at least 10 cm of free space around the unit and wait a minimum of 2 hours before plugging it in after final positioning.

Main features

  • Compact undercounter format Very useful when the available space is limited but you still need to work with draught beer using professional refrigeration.
  • Capacity for 2 x 20-litre kegs Suitable for small or medium bar installations with one or two main lines.
  • Fan-assisted cooling Promotes an even distribution of cold inside the keg cooler.
  • Electronic control Allows more precise adjustment of the working temperature.
  • Removable refrigeration unit Makes servicing easier and helps reduce downtime in case of intervention.
  • Openings for beer lines Designed for real integration into a bar installation.
  • Reinforced base plate Prepared for professional use with keg loading.
  • LED interior light and adjustable feet Improves usability and allows you to level the unit from inside the cabinet.

Technical specifications

Technical specifications of the compact refrigerated keg cooler TEFCOLD SFK-2E+
Especificación Detalle
Brand TEFCOLD
Model SFK-2E+
Tipo de equipo Compact undercounter refrigerated keg cooler
Capacidad nominal 2 x 20-litre kegs
Rango de temperatura +2 a +10 ºC
Climate class: 4 4
Volumen neto 95 l
Volumen bruto 104 L
Peso neto 58 kg
Peso bruto 63.5 kg
Door 1 puerta batiente maciza
Patas Adjustable
Luz interior LED
Cierre Opción de fábrica
Acabado exterior Antracita RAL 7021
Acabado interior Plata
Type of control Electronic
Tipo de refrigeración Ventilada / forzada
Tipo de desescarche Automática
Refrigerante R290
Refrigerant charge: 30 g 80 g
Thermometer Yes
Potencia de entrada 200 W
Alimentación eléctrica 220-240 V / 50 Hz
Nivel de ruido 41 dB(A)
Unidad de máquina Derecha
Medidas interiores (An x Pr x Al) 255 x 500 x 735 mm
Medidas exteriores (An x Pr x Al) 620 x 580 x 840 mm
Packaging dimensions (W x D x H) 660 x 610 x 980 mm
Carga contenedor 40 ft 134 units

Compatibilidad y casos de uso

This keg cooler is designed for professional draft beer installations in bars, restaurants, pubs, food service and bars with limited space. It fits especially well under the counter, near the column or service point, to work with shorter lines and a more controlled installation.

It is a logical solution when a compact capacity of 2 x 20-litre kegs is needed and integrated refrigeration in the unit itself is desired. It can also serve as backup in installations with few products or in spaces where a larger unit is not desirable.

TEFCOLD’s documentation places the SFK range within keg-specific refrigeration and highlights that the series is designed for refrigerated storage of kegs in bar and professional service environments.

Instalación y consideraciones antes de comprar

  • First confirm that the space available under the counter can accommodate the external dimensions of 620 x 580 x 840 mm.
  • The unit is on the right, an important detail if the installation gap or line routing is tight.
  • Leave at least 10 cm of free space around the unit to ensure proper ventilation.
  • Once it is in its final position, wait at least 2 hours before switching it on to allow the refrigerant to settle in the system.
  • To ensure the kegs properly reach serving temperature, you should allow between 8 and 12 hours of cooling.
  • If you need a lock, bear in mind that it is listed as a factory option and not as confirmed standard equipment.

Recommended maintenance and use

One of the most interesting points of the SFK-2E+ is its removable refrigeration unit, designed to make maintenance easier and reduce downtime. In hospitality installations this can make a real difference when technical service needs to act quickly.

To maintain the unit’s performance, it is advisable to clean the condenser periodically with a soft brush or vacuum cleaner, check the condition of the gaskets and ensure proper ventilation around the cabinet. A well-organised keg load also helps air circulation and even cooling.

Frequently asked questions

How many kegs is this model suitable for?

It is designed for 2 x 20-litre kegs.

Is it suitable for a small or medium bar?

Yes. It is a compact solution for undercounter installations with limited space and a need for professional refrigeration.

Is the machine unit on the right or on the left?

In this model, the machine unit is on the right.

Does it have interior lighting and electronic control?

Yes. It includes LED interior light, thermometer and electronic control.

¿Cuánto espacio libre necesita para ventilar correctamente?

Se recomienda dejar al menos 10 cm de espacio libre alrededor del equipo.

¿Cuánto tarda en enfriar bien los barriles?

Conviene prever entre 8 y 12 horas para que los barriles alcancen correctamente la temperatura de servicio.

Descargables

Hoja de producto User manual Despiece y recambios

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Essential accessories

You might also be interested in

Frequently asked product questions
Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.
What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.
Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.
What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.
Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.
How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.
What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.
Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.
How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.
Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.