Lindr · Kontakt 40/K · 2 taps · air compressor
Lindr Kontakt 40/K portable dispenser with integrated compressor for two drinks
The Lindr Kontakt 40/K is a portable dry cooler with 2 taps, integrated air compressor and continuous output of 40 l/h, designed to serve beer and other cold drinks with quick setup, compact format and enough performance for demanding home use, events and small-scale professional use.
Incorpora air compressor automatically set to 2.8–3.2 bar, but it still requires Compatible keg couplers, barril o barriles adecuados y una configuración correcta de tubo y conexiones.
What this product offers
The Lindr Kontakt 40/K is designed for anyone who needs a portable 2-tap beer dispenser with integrated compressor, capable of going beyond basic home use without yet moving to a fixed solution or a much heavier unit. Lindr defines this series as a combination of the compactness of the Pygmy range with the performance and technologies of its professional coolers for restaurants and pubs.
That combination makes a lot of sense in practice. It allows you to serve two independent cold beverages, with a continuous output of 40 litres per hour and a maximum capacity of 50 l/h, while maintaining a portable format with top handles. It is very well positioned for parties, events, garden parties, tastings, beverage corners, temporary bars, light catering and small or seasonal hospitality.
In addition, it brings real operational advantages: built-in compressor, molecular filter, precise temperature control, taps with compensator to control flow rate, quick-connect fittings and a full stainless steel construction. Install Beer adds 4 metres of beer tubing, 4 metres of gas/air tubing and the necessary John Guest connectors to make commissioning easier.
Continuous performance
40 l/h for stable service with two lines or two drinks.
Maximum capacity
50 l/h at 0 °C / TK 45 °C.
Integrated compressor
Sí, con presión automática de 2,8 a 3,2 bar.
Settings
2 taps and 2 independent cold drinks.
Beverage connection
Speedfit 9,5 mm (3/8").
Conexión de aire
Speedfit 8 mm (5/16").
Bloque térmico
1.2 litres of beverage in the cooling block.
Dato importante
It can be connected to 1 or 2 kegs, with built-in air or with CO₂ depending on the installation.
Main features
Compresor de aire incorporado
It simplifies many portable setups and avoids always having to rely on an external bottle in simple configurations.
2 grifos para 2 bebidas frías
It allows you to work with two independent lines, very useful for events, tastings or dual‑reference service.
40 l/h continuous and 50 l/h maximum
Sufficient capacity to serve approximately 80–100 cold drinks per hour according to the manufacturer.
Bloque térmico de 1,2 litros
It provides thermal stability and helps maintain a uniform beverage flow.
Filtro molecular de aire
Lindr equips these models with a built-in compressor with molecular filter to protect the quality of the beverage served.
Grifos con compensador
The manufacturer highlights continuous flow control via compensator taps.
3/8 and 5/16 quick-connect fittings
They make it easier to connect the beverage circuit and air line in temporary or mobile installations.
Universal use
It can also be used in combination with a dispense tower or column.
Robust stainless‑steel structure
Full stainless steel chassis and coils, with a hygienic focus and long service life.
Technical specifications
Confirmed technical data for the Lindr Kontakt 40/K
| Specification |
Detalle confirmado |
| Brand |
Lindr |
| Model |
KONTAKT 40/K NEW GREEN LINE |
| SKU |
PK0171 |
| MPN |
KCH 01627 |
| Equipment type |
Dispensador / enfriador seco portátil de cerveza y otras bebidas con compresor de aire integrado |
| Number of taps |
2 |
| Número de bebidas frías |
2 |
| Maximum capacity |
50 l/h |
| Continuous performance |
40 l/h |
| Gradiente térmico ΔT |
10 °C |
| Potencia del compresor |
1/5 HP · 510 W |
| Potencia eléctrica |
391 W |
| Intensidad |
1.70 A |
| Power supply |
220-240V 50Hz~1 |
| Compresor de aire integrado |
Yes |
| Presión del compresor de aire |
Automática 2,8–3,2 bar |
| Coil length |
2 x 14,0 m |
| Diámetro del serpentín |
7 x 8 mm |
| Volumen de bebida en el bloque térmico |
1,2 l |
| Beverage connection |
Speedfit 9,5 mm (3/8") |
| Conexión de aire |
Speedfit 8 mm (5/16") |
| Dimensiones aproximadas |
478 x 220 x 435 mm according to the commercial technical drawing |
| Net weight |
29.0 kg |
| Materials |
Estructura completa y serpentines en acero inoxidable |
| Refrigerant |
R290 |
| Finish |
Stainless / Green Line |
| Contenido del suministro estándar |
Termostato, grifos, llave de grifo, bandeja de goteo y speed fittings. Install Beer añade 4 m de tubo de cerveza (2 + 2), 4 m de tubo para gas/aire (2 + 2) y conectores John Guest necesarios. |
| Opciones personalizables |
Choice of tap, stainless-steel thread for beverage, stainless-steel thread for air and power-cable plug |
| General compatibility |
Línea de bebida 3/8", línea de aire 5/16", cabezal o cabezales compatibles y barril o barriles adecuados al sistema |
| Protección / seguridad |
The manual states protection rating IP21 and use only for the purposes specified by the manufacturer |
| Certificación / normativa |
The manufacturer states compliance with the latest Czech and European safety and hygiene standards |
Compatibility and use cases
The Kontakt 40/K uses a 3/8" beverage outlet and a 5/16" air outlet, and is designed to serve two independent cold drinks. Its natural setup is unit + beverage lines + air line from the built‑in compressor + compatible keg coupler(s) + keg(s). Install Beer also provides quick‑setup diagrams for working with 1 keg or 2 kegs, using either an air compressor or CO₂.
This gives it very practical flexibility in environments where quick setup and teardown are important: advanced home use, garden parties, small events, tastings, beverage corners, catering, temporary bars, fairs and light or seasonal hospitality. Lindr presents it as a unit capable of covering small foodservice operations while also meeting high service demands in both domestic and commercial contexts.
Además de cerveza, el fabricante habla de beer and other beverages. Aun así, antes de comprar conviene validar la compatibilidad real de la bebida con el circuito, la presión, el sistema de limpieza y el tipo de servicio previsto.
Installation and considerations before buying
-
Confirm whether you are going to work with 1 or 2 kegs: the unit can be set up for one or two products, but the installation layout and number of couplers required will change.
-
Check the correct coupler or couplers: you need the coupler model compatible with each keg or beverage system.
-
Revisa conexiones y medidas: bebida en 3/8" y aire en 5/16". Si tu instalación trabaja con otras medidas, necesitarás adaptación compatible.
-
Consider whether you will use the integrated compressor or work with CO₂: the unit includes a compressor, but depending on the beverage, service time or project, another configuration may be more suitable.
-
Check the available space: although it is still portable, it is a more serious piece of equipment in terms of size and weight. You must allow for a stable surface, ventilation and hose routing.
-
Quick connectors: Install Beer shows in its diagram an approximate insertion of 20 mm of tubing into the quick connector for a correct coupling.
-
Power supply and safety: it requires 220–240V 50Hz~1 and the manual reminds you to check voltage and frequency before connecting the unit.
-
Proper use: the manual states that the unit is intended for chilling and serving beverages, and must not be used for purposes other than those indicated by the manufacturer.
Recommended maintenance and use
As in any dispense system, actual performance depends on line cleanliness, condition of the coupler, correct pressure, temperature, ventilation, and condition of connectors and taps. In a two-line unit this is even more important, because any imbalance between circuits can affect service and flow rate.
The manufacturer itself stresses the importance of maintaining the quality of the drink served, and that is why these models with built-in compressor include a molecular filter. It is also important to follow the manual’s instructions regarding disconnecting the power before cleaning or maintenance and handling the refrigeration circuit, since it uses R290.
Frequently asked questions
Does the Lindr Kontakt 40/K have an integrated air compressor?
Sí. Esta es una de sus diferencias clave: incorpora compresor de aire integrado con presión automática de 2,8–3,2 bar.
How many taps and how many drinks can it serve?
The usual configuration in this spec sheet works with 2 taps and 2 cold beverages, allowing you to serve two independent lines.
¿Incluye el cabezal extractor del barril?
La ficha visible de Install Beer no indica que lo incluya. Sí indica 4 metros de tubo de cerveza, 4 metros de tubo de gas/aire y conectores John Guest necesarios, por lo que conviene elegir aparte el cabezal compatible si no compras un pack cerrado.
¿Qué conexiones utiliza?
La conexión de bebida es 9,5 mm (3/8") y la conexión de aire es 8 mm (5/16"), ambas con racor rápido speedfit.
¿Se puede conectar con 1 barril o con 2 barriles?
Yes. The quick diagram provided by Install Beer shows configurations for 1 keg and 2 kegs, both with air compressor and with CO₂.
What type of use is it best suited for?
It fits very well in demanding homes, gardens, small events, tastings, light catering, temporary bars and small hospitality businesses that need a portable two-line solution.
You may also be interested in
