Barrilero refrigerado gran capacidad para 8 barriles 20L - Install Beer

TEFCOLD SFK-8E+ | High-capacity refrigerated keg cooler for 8 x 20L kegs

Right
4,240.00€ EUR (5,130.40€ EUR IVA incl.)
Skip directly to product information
Barrilero refrigerado gran capacidad para 8 barriles 20L - Install Beer
TEFCOLD SFK-8E+ | High-capacity refrigerated keg cooler for 8 x 20L kegs

TEFCOLD SFK-8E+ | High-capacity refrigerated keg cooler for 8 x 20L kegs

IB0844
4,240.00€ EUR (5,130.40€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

TEFCOLD SFK-8E+ | High-capacity refrigerated keg cooler for 8 x 20L kegs

Right

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656
Draught beer · High capacity

High-capacity refrigerated keg cooler for 8 x 20-litre kegs in high-demand bars

The TEFCOLD SFK-8E+ is a high-capacity refrigerated keg cooler for 8 x 20-litre kegs or 2 x 50-litre kegs, with the machine on the right or left, double door, fan-assisted cooling, and a removable unit for intensive professional use.

What this high-capacity refrigerated keg cooler offers

The TEFCOLD SFK-8E+ is the highest-capacity model in this selection, designed for installations with greater demand for refrigerated storage, higher turnover and more need for kegs ready for service. It is particularly well suited to busy bars, breweries, pubs, high-volume restaurants and projects where keg autonomy is key.

Its double door and large internal volume make it easier to organize service and access the interior in more demanding setups. Additionally, the configuration with the machine unit on the right or left can be an important factor when the bar layout or technical access influences the project.

The removable refrigeration unit, reinforced base, cut-outs for beer lines and electronic control make it a unit clearly designed for continuous professional use and to minimise downtime when service cannot wait.

Key data

Model SFK-8E+
Capacity 8 x 20 l or 2 x 50 l
Temperature +2 to +10 ºC
Net volume 367 l
Doors 2 solid swing doors
Machine unit Derecha o izquierda
Important: for correct performance, it is advisable to leave at least 10 cm of free space around the unit, wait at least 2 hours before plugging it in after final placement, and allow between 8 and 12 hours for the kegs to properly reach serving temperature.

Main features

  • High real capacity for demanding bars Allows working with 8 x 20-litre kegs or 2 x 50-litre kegs, increasing service autonomy during peak hours.
  • Double door and spacious interior Facilitates interior organization and access to the unit when the workload is high.
  • Machine unit on the right or left Important for projects where the location of the refrigeration module affects the installation.
  • Fan-assisted / forced cooling Promotes an even distribution of cold inside the keg cooler.
  • Electronic control Allows precise management of the operating temperature.
  • Removable refrigeration unit Facilitates technical servicing and helps reduce downtime.
  • Reinforced base and line openings Designed for true integration into professional draught beer installations.
  • LED interior light and adjustable feet Improves interior visibility and allows adjustment of the unit from inside the cabinet.

Technical specifications

Technical specifications of the large-capacity refrigerated keg cooler TEFCOLD SFK-8E+
Specification Detail
Brand TEFCOLD
Model SFK-8E+
Equipment type High-capacity refrigerated keg cooler with double door
Nominal capacity 8 x 20-litre kegs or 2 x 50-litre kegs
Temperature range +2 to +10 ºC
Climate class: 4 4
Net volume 367 l
Gross volume 386 l
Net weight 88 kg
Gross weight 100 kg
Doors 2 solid hinged doors
Number of doors 2
Feet Adjustable
Interior light LED
Lock Factory option
Exterior finish Anthracite RAL 7021
Interior finish Silver
Type of control Electronic
Type of refrigeration Fan assisted / forced
Defrost type Automatic
Refrigerant R290
Refrigerant charge: 30 g 80 g
Thermometer Yes
Input power 200 W
Power supply 220-240 V / 50 Hz
Noise level 41 dB(A)
Machine unit Derecha o izquierda
Internal dimensions (W x D x H) 985 x 500 x 735 mm
External dimensions (W x D x H) 1350 x 580 x 840 mm
Packaging dimensions (W x D x H) 1390 x 610 x 980 mm
40 ft container load 62 units

Compatibility and use cases

This keg cooler is aimed at professional draught beer installations in bars, beer halls, pubs and restaurants with high demand. It makes particular sense when more autonomy in cold kegs, better interior organisation and a stable working base for continuous service are required.

Its capacity for 8 x 20-litre kegs or 2 x 50-litre kegs makes it a very solid option for venues with higher volume, greater consumption, and a stronger need for service continuity. The configuration with the machine on the right or left can be especially useful when the compressor side influences the project.

TEFCOLD’s own documentation highlights that the SFK series allows you to work with shorter lines from the keg to the tap, reducing the CO2 pressure required and minimising the risk of foam compared with more traditional methods.

Installation and considerations before buying

  • First confirm that the available space accommodates the external dimensions of 1350 x 580 x 840 mm.
  • This particular model has the machine unit on the right or left.
  • Leave at least 10 cm of free space around the unit for proper ventilation.
  • After placing it in its final position, wait at least 2 hours before plugging it in so that the refrigerant can settle properly.
  • To reach serving temperature, you should allow between 8 and 12 hours for the kegs to cool down.
  • If you need a lock, first check the factory option, as it is not listed as confirmed standard equipment.

Recommended maintenance and use

The SFK-8E+ retains one of the range’s most interesting advantages: the removable refrigeration unit. This makes maintenance easier and allows for faster technical intervention in case of an incident, something especially valuable in very busy bar environments.

To maintain good performance, it is advisable to clean the condenser regularly, check the condition of the gaskets and ensure proper ventilation around the unit. Leaving space between kegs also helps promote even air circulation and effective cooling.

Frequently asked questions

How many kegs does this model hold?

It can work with 8 x 20-litre kegs or 2 x 50-litre kegs.

Is it the highest-capacity model in this selection?

Yes. It is the highest-capacity option within this selection of TEFCOLD SFK keg coolers.

Is it suitable for very busy bars?

Yes. It is specifically designed for bars with higher demand, higher consumption and greater need for autonomy.

Where is the machine unit located?

In this model, the machine unit can be placed on the right or on the left, to be chosen at the time of purchase.

How much free space does it need for proper ventilation?

It is recommended to leave at least 10 cm of free space around the unit.

How long does it take to properly chill the kegs?

You should allow between 8 and 12 hours for the kegs to reach proper serving temperature.

Downloadable

Product sheet User manual Exploded view and spare parts

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Essential accessories

You might also be interested in

Frequently asked product questions
Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.
What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.
Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.
What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.
Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.
How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.
What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.
Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.
How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.
Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.