TEFCOLD DB-H | Refrigerated backbar with hinged doors

44724

666.00€

excl. VAT

805.86€

VAT incl.

740.00€

VAT depends on destination: mainland Spain and Balearic Islands 21%; Canary Islands are outside EU VAT. Final tax is calculated from the delivery address at checkout.

Shipping calculated at checkout.

Model 500 mm | 1 door (92 L) 600 mm | 1 door (115 L) 900 mm | 2 doors (182 L) 1350 mm | 3 doors (278 L)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

TEFCOLD · Backbar with hinged doors

TEFCOLD DB-H back bar cooler for bars, restaurants and hospitality

The TEFCOLD DB-H is a range of refrigerated backbars with hinged glass doors for bars, restaurants, breweries, hotels, coffee shops and horeca projects that need to store and display chilled drinks underbar or backbar with efficiency, quick access and a professional look.

Available in four sizes —DB106H, DB126H, DB201H and DB301H-3— it lets you choose the right width, capacity and number of doors according to available space, drink turnover and bar design.

Available models DB106H, DB126H, DB201H and DB301H-3

Format Backbar undercounter / back of bar

Temperature +2 °C to +10 °C

Widths 500, 600, 900 and 1350 mm

What is the TEFCOLD DB-H refrigerated backbar?

The TEFCOLD DB-H refrigerated backbar is a professional beverage cooler designed to be installed at the bar, backbar or service areas where the product must remain cold, visible and accessible throughout the day.

Its black RAL9005 finish, hinged glass doors, internal LED lighting, lock with key and adjustable shelves make it a very suitable solution for bottled beer, cans, soft drinks, water, kombucha, wine, mixers, tonics, juices and other high-turnover chilled drinks.

Main advantages of the TEFCOLD DB-H range

Efficient range

Models optimized with variable-speed compressor and better energy efficiency compared to the previous DB range.

Hinged doors

Comfortable and quick front access for bars where there is enough space to open the door forwards.

Visible product

Glass doors with double safety glazing and internal LED lighting to enhance beverage display.

Professional use

Ventilated cooling, electronic thermostat, lock with key, adjustable shelves and adjustable feet.

Choose the right model: DB106H, DB126H, DB201H or DB301H-3

Model	Format	Gross / net volume	Indicative capacity	External dimensions	Recommended use
DB106H	1 hinged glass door	105 / 92 L	70 bottles 330 ml / 113 cans 330 ml	500 x 520 x 870 mm	Compact bars, cafés, small breweries, bar support or areas with limited space.
DB126H	1 hinged glass door	125 / 115 L	84 bottles 330 ml / 161 cans 330 ml	600 x 520 x 870 mm	Venues with slightly higher turnover and more front space, while maintaining a compact single-door format.
DB201H	2 hinged glass doors	190 / 182 L	143 bottles 330 ml / 276 cans 330 ml	900 x 520 x 870 mm	Bars, restaurants, hotels, breweries and counters with a greater variety or volume of cold drinks.
DB301H-3	3 hinged glass doors	300 / 278 L	218 bottles 330 ml / 380 cans 330 ml	1350 x 520 x 870 mm	Large bars, high-turnover restaurants, hotels, breweries, cocktail bars and venues with an extensive drinks menu.

Recommended applications

Bars and restaurants: keeping bottles and cans cold in the bar or back bar area.
Breweries and taprooms: support for bottled beer, craft cans, water, soft drinks, kombucha and complementary beverages.
Hotels and cafés: backbar for quick-serve drinks, breakfast, room service, coffee shop or common areas.
Cocktail bars: cooling of mixers, soft drinks, tonics, water, juices and support products for cocktails.
Indoor events and temporary bars: compact solution to keep drinks visible and accessible.
Tap dispensing projects: complement for packaged drinks alongside beer, wine, water, cocktails or kombucha on tap.

Comparative technical features

Feature	DB106H	DB126H	DB201H	DB301H-3
Manufacturer item no.	44724	44725	44726	44727
GTIN / EAN	5708181713980	5708181713997	5708181714000	5708181714017
Equipment type	Backbar refrigerator	Backbar refrigerator	Backbar refrigerator	Backbar refrigerator
Temperature range	+2 °C to +10 °C	+2 °C to +10 °C	+2 °C to +10 °C	+2 °C to +10 °C
Climate class: 4	4	4	4	4
Gross / net volume	105 / 92 L	125 / 115 L	190 / 182 L	300 / 278 L
330 ml bottles	70 units	84 units	143 units	218 units
500 ml PET bottles	70 units	84 units	143 units	218 units
330 ml cans	113 units	161 units	276 units	380 units
500 ml cans	96 units	112 units	188 units	266 units
Full display	0.29 m²	0.35 m²	0.50 m²	0.75 m²
Number of doors	1 hinged glass door	1 hinged glass door	2 hinged glass doors	3 hinged glass doors
Reversible door	Yes	No	No	No
Exterior finish	Black RAL9005	Black RAL9005	Black RAL9005	Black RAL9005
Interior finish	Stuccoed aluminium	Stuccoed aluminium	Stuccoed aluminium	Stuccoed aluminium
Shelves	2 white wire shelves	2 white wire shelves	4 white wire shelves	6 white wire shelves
Shelf dimensions	395 x 350 mm	495 x 350 mm	395 x 320 mm	395 x 320 mm / 432 x 320 mm
Maximum shelf load	196 kg/m²	196 kg/m²	196 kg/m²	196 kg/m²
Feet	4 adjustable feet	4 adjustable feet	4 adjustable feet	4 adjustable feet
Lock	Yes	Yes	Yes	Yes
Interior light	LED	LED	LED	LED
Type of control	Electronic	Electronic	Electronic	Electronic
Type of refrigeration	Fan assisted	Fan assisted	Fan assisted	Fan assisted
Defrost type	Automatic	Automatic	Automatic	Automatic
Refrigerant	R600a	R600a	R600a	R600a
Refrigerant charge: 30 g	45 g	55 g	70 g	90 g
Thermometer	Yes	Yes	Yes	Yes
Energy class	A	A	A	B
Annual energy consumption	310 kWh/year	350 kWh/year	394 kWh/year	657 kWh/year
Daily energy consumption	0.85 kWh/24 h	0.96 kWh/24 h	1.08 kWh/24 h	1.80 kWh/24 h
Input power	95 W	95 W	115 W	125 W
Voltage / frequency	220-240 V / 50 Hz	220-240 V / 50 Hz	220-240 V / 50 Hz	220-240 V / 50 Hz
Noise level	44 dB(A)	44 dB(A)	44 dB(A)	44 dB(A)
External dimensions	500 x 520 x 870 mm	600 x 520 x 870 mm	900 x 520 x 870 mm	1350 x 520 x 870 mm
Internal dimensions	410 x 418 x 720 mm	510 x 418 x 720 mm	810 x 418 x 720 mm	1265 x 418 x 720 mm
Packing dimensions	585 x 575 x 940 mm	685 x 575 x 940 mm	985 x 575 x 940 mm	1435 x 575 x 940 mm
Gross / net weight	45 / 40 kg	52 / 46 kg	69 / 63 kg	95 / 88 kg
40 ft container load	160 units	136 units	96 units	64 units

Capacity and use in a professional bar

Actual capacity depends on the type of container, bottle height, can geometry, internal layout and restocking frequency. As a reference, the DB106H is suitable for small bars or as service support; the DB126H increases capacity while maintaining a single door; the DB201H is a very well-balanced size for hospitality; and the DB301H-3 is the highest-capacity option within this family of hinged-door units.

Install Beer recommendation: when choosing the right model, it is not advisable to look only at litres. You need to consider available width, type of drink, daily turnover, restocking, ambient temperature, opening frequency and whether the backbar will be the main cold storage for the bar or support alongside other equipment.

Installation, ventilation and start-up

Backbar refrigerators must be installed indoors, on a stable, level surface with sufficient ventilation. On-bar or behind-bar it is especially important not to block air inlets and outlets, as ventilation directly affects the unit’s performance, consumption and service life.

Install indoors only, in a dry and ventilated area.
Avoid proximity to ovens, dishwashers, radiators, heat sources or direct sunlight.
Do not place next to direct air-conditioning or ventilation outlets that could affect operation.
Leave enough space for ventilation, especially if the unit is built in under a bar or between cabinets.
Do not block grilles, air inlet, rear or heat dissipation areas.
Level the unit using the adjustable feet to ensure stability and proper closing.
Connect to an accessible 220–240 V / 50 Hz socket with earth connection.
Do not connect to power strips, multi-socket bases or multipolar distribution outlets.
If the unit has been transported lying down, leave it upright before starting it up.

Recommended use and beverage storage

The TEFCOLD DB-H range is designed to keep packaged drinks cold and visible in professional service environments. Ventilated cooling helps distribute the cold evenly and recover temperature when there is product turnover.

Use for packaged drinks: beer, water, soft drinks, wine, kombucha, mixers, tonics, juices and ready-to-serve beverages.
Do not load large quantities of hot or non-precooled product.
Do not overload the shelves or block the circulation of air inside.
Keep the doors closed when not restocking or serving product.
Organise products using stock rotation to reduce unnecessary door openings.
Use the LED lighting to enhance the visual presentation at the bar or point of sale.

Recommended maintenance and cleaning

Preventive maintenance helps reduce consumption, prevent breakdowns and maintain a stable temperature. In bars and restaurants with intensive use, cleaning the exterior, interior and ventilation areas should be part of the daily routine.

Always unplug the unit before cleaning or maintenance.
Clean interior, exterior, doors and gaskets with mild products suitable for commercial refrigeration.
Do not use water jets, pressure equipment or abrasive products.
Keep the grilles and ventilation areas clear.
Periodically check gaskets, locks, hinges, shelves and adjustable feet.
Clean the condenser periodically according to use and working environment.
Use original spare parts and qualified technical service in case of breakdown.

Compatibility and operating limits

Important: these units are backbar refrigerators for packaged drinks. They are not tap-dispense systems, do not chill beer, wine, water or cocktail lines, and do not replace a keg cooler or a draft beverage installation.

In professional bar projects, the backbar can coexist with beer taps, wine on tap, filtered water, cocktails, kombucha or nitro coffee. Each function must be sized separately: cooling for packaged product, keg cooling, beverage lines, gas, taps, water treatment, cleaning and maintenance.

Downloads and technical documentation

We recommend checking the technical documentation before installing the unit, especially if it will be placed under a counter, fitted between cabinets, near hot equipment or in areas with limited ventilation.

Frequently asked questions about TEFCOLD DB-H backbars

What is the difference between DB106H, DB126H, DB201H and DB301H-3?

The main difference lies in the width, number of doors and capacity. The DB106H measures 500 mm and has 92 L net; the DB126H measures 600 mm and has 115 L net; the DB201H measures 900 mm, has 2 doors and offers 182 L net; and the DB301H-3 measures 1350 mm, has 3 doors and offers 278 L net.

Is it suitable for beer, water, soft drinks and mixers?

Yes. They are designed to store packaged drinks in bottles and cans, such as beer, water, soft drinks, mixers, kombucha, wine, juices and ready-to-serve beverages.

Are they suitable for installing under the bar?

Yes, they are backbar coolers designed for bar and backbar installation. You must respect ventilation and not block the grilles or air inlet.

Do they have a lock with key?

Yes. Models DB106H, DB126H, DB201H and DB301H-3 include a lock, which is useful in hospitality, shared areas, hotels, events and self-service spaces.

Which model should I choose for a small bar?

For a reduced space, the DB106H is usually the most compact option. If more capacity is needed while keeping a single door, the DB126H is an intermediate alternative. For higher turnover or a wider variety of drinks, the DB201H offers 2 doors and the DB301H-3 offers 3 doors.

Is the door reversible?

In this range, the DB106H is specified as having a reversible door. The DB126H, DB201H and DB301H-3 models are not specified as reversible in the manufacturer’s data sheet.

What is the difference between hinged doors and sliding doors?

Hinged doors provide full front access and are usually convenient when there is enough space in front of the unit. Sliding doors are more suitable for narrow bars or areas where you do not want the door to swing into the passageway.

Do they replace a draft beer system?

No. They are coolers for packaged drinks. For draft beer, wine on tap, filtered water or cocktails on tap you need a specific system for dispensing, cooling, lines, gas and taps.

What maintenance is required?

It is recommended to clean the unit periodically, keep ventilation areas clear, check gaskets and locks, and clean the condenser according to usage and working environment. Repairs must be carried out by qualified technicians using suitable spare parts.

Install Beer technical advice

At Install Beer we can help you choose between DB106H, DB126H, DB201H and DB301H-3 according to the available space, service volume, drink rotation, bar design and integration with tap dispensing systems, coolers, treated water, CO₂, cleaning and technical maintenance.

Request advice View TEFCOLD collection

Shipping: check availability, lead time, and applicable cost before completing your order.

Terms: see the shipping, returns, and warranty pages for the applicable conditions.

Buy technical products with confidence

Confirm compatibility before purchasing

With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.

Application

Beverage, location, expected flow and installation type.

Connection

Thread, hose barb, push-fit connector, internal and external diameter.

Conditions

Pressure, gas, temperature, material and cleaning requirements.

Check which accessories, seals or adapters are included.

TEFCOLD DB-H | Refrigerated backbar with hinged doors

TEFCOLD DB-H | Refrigerated backbar with hinged doors

TEFCOLD DB-H back bar cooler for bars, restaurants and hospitality

What is the TEFCOLD DB-H refrigerated backbar?