Single-body regulator

Single-outlet CO2 gas cylinder regulator

Single-body CO2 gas pressure reducer for perfect carbonation in every beer service. With safety valve and thermal insulating cap, this regulator ensures precise, constant pressure, preventing over-carbonation or flat beer. Robust construction and food-grade approved coating.

Single-body pressure regulator or gauge that regulates the pressure of the gas cylinder (high-pressure source) and connects it to the beer keg, attached to the keg valve (reduces the pressure). When a pressure is recommended it is usually specified. The gas regulator has a manual adjustment screw or knob to regulate the amount of pressure supplied to the keg.

The gas regulator is vitally important for maintaining the correct CO2 level in beer. Too much CO2 can add excess CO2 to the beer and cause foaming and over-carbonation issues, while too little CO2 pressure can release the CO2 from the beer itself, resulting in flat beer with little or no gas/head.

NSF61-certified food-grade galvanic coating – SK approval.

Stamped brass body with built-in safety valve and PTFE sealing gasket.

High-pressure valve interior constructed in AISI 300 stainless steel.

Thermal-insulating synthetic resin cap that improves and optimizes regulator performance by preventing freezing and avoiding annoying condensation.

High-pressure gauge: 0–250 bar

Low-pressure gauge: 0–10 bar (factory set to 7 bar)

Available outlets: 8mm metal barb / 3/8" tube quick connection

Dimensions: 21.8w-14fil.x1″ CH.30 - 250x200x100 mm

The hose for the pressure regulator is not included; it comes standard with a fixed arm. A version with hose is available as an extra.