Módulo sensor de O2 LogiCO2 Mk9 - Install Beer

Additional LogiCO2 Mk9 O2 sensor kit

790.00€ EUR (955.90€ EUR IVA incl.)
Skip directly to product information
Módulo sensor de O2 LogiCO2 Mk9 - Install Beer
Additional LogiCO2 Mk9 O2 sensor kit

Additional LogiCO2 Mk9 O2 sensor kit

LG012
790.00€ EUR (955.90€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

Additional LogiCO2 Mk9 O2 sensor kit

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656
Oxygen sensor · LogiCO2

LogiCO2 Mk9 O2 sensor to extend or replace a detection point

The LogiCO2 Mk9 O2 sensor module is an optical oxygen sensor for systems with an Mk9 central unit. It measures ambient O2 concentration, displays the value on screen, and generates an alarm when the level drops below a safe threshold.

What this product offers

This product fits as a spare part or extension within an existing LogiCO2 system. It is not a complete kit with central unit, horn, or power supply, but the oxygen sensor module.

Its technical value lies in optical oxygen measurement with integrated temperature and pressure compensation, low power consumption and long service life. The manufacturer also states that it is factory-calibrated.

It is a useful solution in installations where it is necessary to monitor atmospheres with low-oxygen risk and keep the reading integrated within the LogiCO2 Mk9 ecosystem.

Key data

Manufacturer’s part number 1142
SKU Install Beer LG012
Type O2 sensor for system with Mk9 control unit
Measuring range 0–25% O2
Visual alarm Red for alarm <19.5% O2
Sales format Spare part without cable
Important: this item is documented as a spare part without cable. Before purchasing, it’s advisable to confirm that you already have the cabling and compatible LogiCO2 Mk9 architecture.

Main features

  • Optical O2 sensor Uses the FB-optical principle to measure ambient oxygen concentration.
  • Integrated compensation Includes temperature and pressure compensation.
  • Factory-calibrated The manufacturer supplies it calibrated from the factory.
  • Compatible with Mk9 central unit Communicates via Modbus RTU with the LogiCO2 Mk9 central unit.
  • Compatible with CO2 sensors It can operate together with the different LogiCO2 CO2 sensors within the same system.
  • Backlit display Shows current O2 concentration and operating hours.
  • Clear local indication Operation, fault, and alarm LEDs, plus an audible warning for fault or alarm.
  • Compact format Small dimensions for integration in technical installations.

Technical specifications

Confirmed technical specifications of the LogiCO2 Mk9 O2 sensor module
Parameter Confirmed data
Brand LogiCO2
Model O2 Sensor Mk9
SKU LG012
MPN / manufacturer part number 1142
Equipment type Oxygen sensor for LogiCO2 Mk9 system
Supply format Wireless sensor, listed as a spare part
Power supply 24 V DC
Operating principle FB-optical
Measuring range 0–25% O2 concentration
Precisión <2% FS
System compatibility Compatible with LogiCO2 Mk9 CO2 Safety System
Communication Modbus RTU with the LogiCO2 Mk9 central unit
Display Backlit; displays current O2 concentration and operating hours
LEDs Green: operation · Yellow: fault · Red: alarm (<19.5% O2)
Audible alarm Flashing: fault · Steady: alarm
Ingress protection IP54
Dimensions 90 x 161 x 38 mm
Approvals UL 61010-1, CAN/CSA-C22.2 No. 61010-1-12, IEC 60529
Material Plastic
Weight 1 Kg
Scope of supply O2 Mk9 Sensor

Compatibility and use cases

This sensor is designed to work with the LogiCO2 Mk9 control unit and communicate via Modbus RTU within the safety system.

The manufacturer states that it can be used together with the different LogiCO2 CO2 sensors, which makes it useful in mixed installations where different gas risks are monitored within the same architecture.

It is suitable as a replacement for an existing sensor or as an expansion of a compatible system, provided the configuration of the assembly and the corresponding wiring are respected.

Installation and considerations before buying

  • Confirm before purchasing that your installation has a compatible LogiCO2 Mk9 central unit.
  • Check whether you need only the sensor or also cabling, since the datasheet defines it as a spare part without cable.
  • Check the reference of the sensor to be replaced to avoid errors during maintenance or expansion.
  • If your system combines CO2 and O2 sensors, check the overall architecture before expanding.
  • Al ser un componente de seguridad, la instalación y comprobación funcional deben realizarse con criterio técnico.

Recommended maintenance and use

As this is a safety sensor, it is advisable to periodically check its operating status, the display reading, LED indication, and audible fault or alarm warning.

After any replacement, it is advisable to verify proper communication with the Mk9 control unit and check that the reading and local signaling respond correctly.

Frequently asked questions

Is this product a complete detection system?

No. It is only the O2 sensor module; it does not include a central unit or a complete alarm kit.

¿Incluye cable?

The datasheet lists it as a spare part without cable.

Which central unit is it compatible with?

It is compatible with the LogiCO2 Mk9 central unit and communicates via Modbus RTU.

Can it operate together with CO2 sensors?

Yes. The manufacturer states that it can be used together with the different LogiCO2 CO2 sensors.

What O2 range does it measure?

It measures oxygen concentration from 0 to 25%.

When does it switch to red visual alarm?

When the concentration drops below 19.5% O2.

Downloadable

O2 Mk9 Sensor datasheet Official product page

You may also be interested in

LogiCO2 products Technical advice and installation

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Essential accessories

You might also be interested in

Frequently asked product questions
Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.
What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.
Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.
What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.
Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.
How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.
What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.
Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.
How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.
Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.