▶️ Type U Beer Coupler 3 Lugs MM

Cabezal Tipo U (3 Ergots) - Micro Matic-Install Beer

Type U 3-Lug Micro Matic coupler head

Head only

53.91€ EUR (65.23€ EUR IVA incl.)

Type U 3-Lug Micro Matic coupler head

PK0183

53.91€ EUR (65.23€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

Fast and secure shipping

Flexible returns

Type U Micro Matic coupler with 3 lugs for dispensing beer and kegged beverages

Coupler compatible with imported Irish beer kegs (not Guinness)

Maximize dispensing efficiency with the Micro Matic Type U coupler head with 3 lugs. Ideal for draft beers and kegged drinks, it ensures precise, long-lasting service. The preferred choice for experts and lovers of a good drink.

This U-type beer and beverage keg coupler by Micro Matic is an excellent option for those seeking quality dispensing. With its alloy and stainless-steel metal construction, it is easy to install and provides a smooth, even beverage flow. It is compatible with all beer and beverage kegs with U-type valves, making it a versatile choice for any bar or restaurant. In addition, its easy maintenance and cleaning make it ideal for any business looking for a reliable, long-lasting coupler.

This coupler* fits all valves of the “U” keg system, or U/E.C type. Efficient: Designed for maximum flow, with a specially designed gas inlet nozzle that eliminates the need for a coupling washer when used with standard NADS check valves. Gas flow is controlled by a lever: pressure is off in the normal position. Simple: The connection between the coupler and spear is made by slightly turning the coupler until it stops and then pushing the handle down until it locks in place. Cleaning: The coupler can be quickly disassembled for cleaning and periodic maintenance.

Connect the coupler to the spear by slightly turning the coupler until it stops, then push the handle down until it locks into place.

*Metal tailpiece outlets not included, sold separately.

Head outlets: 1/2 x 1/2 BSP thread.

3-lug connection (3 tabs).

Pack with John Guest to 3/8" tubes.

Deluxe pack with brass John Guest fittings to 3/8" tubing. Includes 3/8" tube support springs.

With CO2 and beer non‑return valves included!

With circular flange. Very durable and easy to use.

Includes two non-return valves, one for beer and one for gas.

High-quality surface finishes.

Carefully designed specifically to prevent dirt build-up.

EPDM gaskets for food use.

Easy disassembly for cleaning or maintenance.

Frequently asked questions

Depende del tipo de conector/cabezal, roscas y diámetro de tubo. Si nos indicas tu configuración o envías una foto, te confirmamos la compatibilidad.

Tipo de rosca, diámetro interior/exterior del tubo, tipo de racor (rápido/espiga/rosca) y si es para línea de cerveza, gas o agua.

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.

El material (acero inoxidable, latón, etc.) está pensado para uso alimentario y de dispensación. Si vas a usarlo con otra bebida o en condiciones especiales, te orientamos.

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.

La clave es identificar el estándar de rosca y el tipo de conexión de tu sistema. Si tienes dudas, envíanos una foto de la pieza actual y te ayudamos a elegir.

Normalmente se debe a junta gastada, medida incorrecta, tubo mal cortado o sellado insuficiente. Te ayudamos a diagnosticarlo y a solucionarlo.

Sí, algunos componentes influyen en el flujo y estabilidad. Si tienes problemas de espuma o caudal, te orientamos para equilibrar presión, temperatura y línea.

Depende del uso y la limpieza, pero conviene revisarlos periódicamente para evitar fugas y mantener un servicio estable e higiénico.

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.