Three-body pressure regulator

Three‑way primary regulator for CO2 gas cylinder

Three‑outlet CO2 gas pressure regulator that provides precise dispensing for beer and beverages. Brass body, manual adjustment and high/low pressure gauges to maintain optimal CO2 in each line. Prevents excessive foam and flat beer. Quality connections and insulating cap for superior performance

The regulator reduces cylinder pressure to the keg service pressure. The knob adjusts the pressure; the gauges indicate it.

The gas regulator is vitally important for maintaining the correct level of CO2 in the beer. Too much CO2 can add CO2 to the beer and cause problems with foam and over-carbonation, while too little CO2 pressure can release the CO2 from the beer itself, resulting in flat beer with no gas/foam.

NSF61-certified food-grade galvanic coating – SK approval.

Stamped brass body with built-in safety valve and PTFE sealing gasket.

Interior of the high-pressure valve made of AISI 300 stainless steel.

Thermal-insulating synthetic resin cap that contributes to the regulator’s thermal insulation.

High-pressure gauge: 0–250 Bar

Low-pressure gauge: 0–10 bar (factory set to 7 bar)

Available outlets: 8 mm metal barb / 3/8" John Guest push-fit connection

Dimensions: 21.8w-14row.x1″ AF.30 - 250x200x100mm

Select the cylinder connection variant: direct with fixed arm, or hose with wall mounting. The supplied connection depends on the selected variant. Also select 8 mm barbed outlets or John Guest fittings for 3/8" tubing.