Barrilero refrigerado doble puerta para 6 barriles 20L - Install Beer

TEFCOLD SFK-6E+ | Double-door refrigerated keg cooler for 6 x 20L kegs

Right
3,005.00€ EUR (3,636.05€ EUR IVA incl.)
Skip directly to product information
Barrilero refrigerado doble puerta para 6 barriles 20L - Install Beer
TEFCOLD SFK-6E+ | Double-door refrigerated keg cooler for 6 x 20L kegs

TEFCOLD SFK-6E+ | Double-door refrigerated keg cooler for 6 x 20L kegs

IB0843
3,005.00€ EUR (3,636.05€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

TEFCOLD SFK-6E+ | Double-door refrigerated keg cooler for 6 x 20L kegs

Right

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656
Draft beer · Undercounter

Double-door refrigerated keg cooler for 6 x 20-litre kegs in higher-traffic bars

The TEFCOLD SFK-6E+ is a double-door refrigerated keg cooler for 6 x 20-litre kegs or 1 x 50-litre keg, with the unit positioned on the left or right, fan-assisted cooling, and a removable unit to facilitate maintenance in professional bar settings.

What this double-door refrigerated keg cooler offers

The TEFCOLD SFK-6E+ is designed for busy bars, breweries, restaurants, and dispensing projects that require greater autonomy for cold kegs and more convenient internal organization under or behind the bar. Its double door eases interior access and improves operations when service volume demands a more capable solution.

Its configuration with the machine unit on the left or right can better suit the layout of furniture, available ventilation, or technical access in the installation. This is especially useful when the compressor side influences the project.

In addition, the removable refrigeration unit, reinforced base, cut-outs for beer lines and electronic control make it clearly geared towards intensive professional use.

Key data

Model SFK-6E+
Capacity 6 x 20 l or 1 x 50 l
Temperature +2 to +10 ºC
Net volume 276 l
Doors 2 solid swing doors
Machine unit Left or right
Important: for correct operation, you should leave at least 10 cm of free space around the unit, wait 2 hours before plugging it in after installation and allow between 8 and 12 hours for the kegs to properly reach serving temperature.

Main features

  • Double door for easier access Facilitates internal organization and keg handling in bars with higher turnover.
  • Capacity for 6 x 20-litre kegs or 1 x 50-litre keg Suitable for installations requiring greater service autonomy.
  • Machine unit on the left or right Useful when the project requires that orientation due to ventilation, technical access, or bar layout.
  • Fan-assisted / forced cooling Promotes an even distribution of cold inside.
  • Electronic control Enables precise management of the working temperature.
  • Removable refrigeration unit Helps reduce downtime and facilitates technical servicing.
  • Reinforced base and line openings Designed for true integration into professional draught beer installations.
  • LED interior light and adjustable feet Enhances visibility and allows adjustment of the unit from inside the cabinet.

Technical specifications

Technical specifications of the TEFCOLD SFK-6EL+ double-door refrigerated keg cooler
Specification Detail
Brand TEFCOLD
Model SFK-6E+
Equipment type Double-door undercounter refrigerated keg cooler
Nominal capacity 6 x 20-litre kegs or 1 x 50-litre keg
Temperature range +2 to +10 ºC
Climate class: 4 4
Net volume 276 l
Gross volume 292 l
Net weight 78.5 kg
Gross weight 88 kg
Doors 2 solid hinged doors
Number of doors 2
Feet Adjustable
Interior light LED
Lock Factory option
Exterior finish Anthracite RAL 7021
Interior finish Silver
Type of control Electronic
Type of refrigeration Fan assisted / forced
Defrost type Automatic
Refrigerant R290
Refrigerant charge: 30 g 80 g
Thermometer Yes
Input power 200 W
Power supply 220-240 V / 50 Hz
Noise level 41 dB(A)
Machine unit Left or right
Internal dimensions (W x D x H) 745 x 500 x 735 mm
External dimensions (W x D x H) 1110 x 580 x 840 mm
Packaging dimensions (W x D x H) 1150 x 610 x 980 mm
40 ft container load 76 units

Compatibility and use cases

This keg cooler is aimed at professional draught beer installations in bars, breweries and restaurants with more continuous service. It is a logical solution when a 2- or 4-keg model falls short and you need better internal organisation while still keeping an undercounter format.

Its double door improves access and daily operation, while the machine unit on the left or right can better accommodate projects where the compressor side affects the installation.

TEFCOLD’s own documentation also highlights that, compared with more traditional cooling, the SFK series helps you work with shorter lines from keg to tap and with lower CO2 pressure, minimising the risk of foam and improving service stability.

Installation and considerations before buying

  • First confirm that the available space can accommodate the external dimensions of 1110 x 580 x 840 mm.
  • This particular model features the machine unit on the left or right.
  • Leave at least 10 cm of free space around the unit for proper ventilation.
  • After placing it in its final position, wait at least 2 hours before plugging it in so that the refrigerant can settle properly.
  • To reach serving temperature, you should allow between 8 and 12 hours for the kegs to cool down.
  • If you need a lock, first check the factory option, as it is not listed as confirmed standard equipment.

Recommended maintenance and use

One of the strengths of the SFK-6E+ is its removable refrigeration unit. If an issue occurs, this allows for quick technical intervention and helps minimize downtime, which is especially valuable in busy bars.

To maintain performance, it is advisable to clean the condenser frequently, check the condition of the gaskets and ensure correct ventilation around the unit. Leaving enough space between kegs also helps to promote even air circulation.

Frequently asked questions

How many kegs does this model hold?

It can work with 6 x 20-litre kegs or with 1 x 50-litre keg.

What advantage does it have over a smaller model?

It offers more usable capacity and better interior organisation for bars with higher turnover or more references on tap.

Where is the machine unit located?

In this model, the machine unit can be placed on the left or on the right; you can choose the option that suits you best.

Is this keg cooler designed for intensive hospitality use?

Yes. Its design is clearly focused on bars and breweries with continuous service.

How much free space does it need for proper ventilation?

It is recommended to leave at least 10 cm of free space around the unit.

How long does it take to properly chill the kegs?

You should allow between 8 and 12 hours for the kegs to reach proper serving temperature.

Downloadable

User manual Exploded view and spare parts Product sheet

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Essential accessories

You might also be interested in

Frequently asked product questions
Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.
What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.
Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.
What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.
Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.
How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.
What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.
Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.
How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.
Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.