Pack de manorreductor especial con botella CO2 1300gr-Install Beer

Pressure regulator and 1300 g CO2 gas bottle

7/16 FFL thread
97.85€ EUR (118.39€ EUR IVA incl.)
Skip directly to product information
Pack de manorreductor especial con botella CO2 1300gr-Install Beer

Pressure regulator and 1300 g CO2 gas bottle

PK0143
97.85€ EUR (118.39€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

View store information

Pressure regulator and 1300 g CO2 gas bottle

7/16 FFL thread

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656

Complete gas regulator kit with 1300 g CO2 gas cylinder

Discover the regulator kit with 1300g CO2 gas cylinder, essential for serving draft beer and beverages at the ideal pressure. It includes gas regulator, CO2 cylinder and vertical stand, ensuring constant, high-quality dispensing. Ideal for lovers of beer and craft drinks, its design allows precise control of carbonation, maintaining flavor and freshness. Compatible with various tap systems, this kit is a comprehensive solution for beverage dispensing.

Pack of special regulator with 1300g gas bottle (M11X1 thread).

Includes a vertical plastic stand to keep the bottle upright and stable.

Contains 1300 g of pure net CO2 gas (E290) with a volume of 2050 ml.

Low‑pressure gauge: 0–10 Bar

Available outlets: 3/8" John Guest push-fit / 7/16-20UNF FFL thread

M11x1 ACME 11 mm bottle thread

Maximum cylinder pressure 36 bar

The pressure regulator or gauge regulates the pressure from the gas cylinder (high‑pressure source) and connects it to the beer keg, via the keg valve (reducing the pressure). When a specific pressure is recommended, it is usually stated. The gas regulator has a manual adjustment screw or knob to set the amount of pressure supplied to the keg.

The gas regulator is vitally important for maintaining the correct CO2 level in beer. Too much CO2 can add excess CO2 to the beer and cause foaming and over-carbonation issues, while too little CO2 pressure can release the CO2 from the beer itself, resulting in flat beer with little or no gas/head.

Food-grade galvanic coating according to NSF61 – SK approval. Stamped brass body and PTFE sealing gasket. High-pressure valve interior made of AISI 300 stainless steel. Thermally insulating synthetic resin cap that improves and optimizes regulator performance by preventing freezing and avoiding annoying condensation build-up.

Non-refillable CO2 bottle* for cooling and dispensing beer. Suitable for use with pressure regulators. High-strength metal container. 11 mm threaded connection for exclusive use with ACME equipment approved for this purpose.

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Essential accessories

You might also be interested in

Frequently asked product questions

Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.

What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.

Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.

What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.

Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.

How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.

What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.

Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.

How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.

Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.