Application
Beverage, location, expected flow and installation type.
Cooler agitator for cold water recirculation
1 Stage - 3 Outlets
73.84€
excl. VAT
89.34€ VAT incl.
Skip directly to product information
Cooler agitator for cold water recirculation
IB0061
73.84€
excl. VAT
89.34€ VAT incl.
VAT depends on destination: mainland Spain and Balearic Islands 21%; Canary Islands are outside EU VAT. Final tax is calculated from the delivery address at checkout.
Shipping calculated at checkout.
Pickup available at Install Beer S.L.
Usually ready in 4 hours
Technical spare part for ice bank coolers
Cooler agitator for recirculating cold water and protecting the line
The cooler agitator is a spare part for recirculating cold water inside ice-bank coolers. It keeps the water moving, prevents it from freezing and helps maintain the temperature in the dispense line.
What this product offers
This agitator is installed in coolers with a cold-water circuit to keep the water moving inside the tank and push it towards the recirculation outlets. Its function is highly technical and specific: to prevent the water inside from freezing and to help maintain the temperature in the line up to the point of service.
In beer and other tap beverage installations, thermal stability of the line is crucial to reduce issues, improve service and work more consistently. A suitable agitator does not chill the drink by itself: it makes it possible for the chilled water to do its job properly within the system.
This replacement part is intended for both professional environments and compatible home installations, especially when working with coolers with an ice bank and a recirculation line to the column, tap or service area.
Key data
SKU IB0061 and IB0062 Spare part for a cooler with cold‑water circulation.
Settings 1 or 2 stages Available depending on variant, with 3 chilled-water outlets.
Compatibility V-50, V-100, V-200, H-100 and H-200 Designed for coolers compatible with water recirculation.
Power supply 220 V / 50 Hz / 55 W Published nominal consumption of 0.26 A.
Dimensions 150 x 120 x 270 mm Overall dimensions of the agitator assembly.
Motor and pump assembly EBM + Gol-98 EBM M2E068-CF10-17 motor, Gol-92 turbine and impeller for M6.
Important: this reference corresponds to the version without integrated capacitor. If your unit requires a separate start capacitor, it is advisable to confirm this before purchasing.
Main features
- Continuous recirculation of cold water Keeps the water moving inside the cooler and helps prevent it from freezing.
- 3 chilled-water outlets Designed to circulate water through compatible line-cooling circuits.
- Choice of 1 or 2 stages Allows you to adapt the pushing power to the distance and demands of the circuit.
- Compatibility with V and H coolers Installation specified for V-50, V-100, V-200, H-100 and H-200.
- Identified technical assembly Includes Gol-98 pump, Gol-92 turbine and EBM motor M2E068-CF10-17.
- Configurable assembly According to the published information, it can be assembled with any type of connection and impeller.
- Spare part for line cooling, not for beverage It is intended to move chilled water, not to pump beer, wine or soft drinks.
- Compact format Small dimensions for replacement or installation in compatible units.
Technical specifications
| Property | Detail |
|---|---|
| Product | Cooler agitator |
| Model | Cooler agitator, 3 outlets |
| SKU | IB0061 and IB0062 |
| MPN | 1200020013 and 1200020014 |
| Equipment type | Spare part / agitator for recirculation of chilled water in an ice bank machine |
| Version | Without integrated capacitor |
| Available stages | 1 stage or 2 stages, depending on variant |
| Number of outlets | 3 chilled water outlets |
| Main function | Keep the water moving to prevent freezing and to drive water through the tube cooling outlets |
| Overall dimensions | 150 x 120 x 270 mm |
| Weight | 2,500 g |
| Materials | Metal and plastic; outlets specified for 7 x 10 mm clear PVC tube |
| Connections / installation notes | According to the published information, it can be mounted with any type of connection and impeller |
| Outputs | Clear PVC tube, 7 x 10 mm |
| Impeller | 8 mm, 50 mm diameter, for M6 |
| Pump | Gol-98 |
| Turbine | Gol-92, 9 mm diameter |
| Motor | EBM M2E068-CF10-17 |
| Power supply | 220 V / 50 Hz / 55 W / 0.26 A / F-V 2/450 |
| Published compatibility | V-50, V-100, V-200, H-100 and H-200 beer coolers |
| Scope of supply | Agitator according to selected variant |
| Color / finish | Chrome and black |
| Certifications | Patent AGG98113 |
Compatibility and use cases
Technical compatibility
This agitator is intended for ice bank coolers that work with chilled water circulation. The published compatibility includes models V-50, V-100, V-200, H-100 and H-200.
Its job is not to drive the beverage, but the cold water in the circuit. That’s why it fits systems where the product line needs recirculation support up to the column, tap or remote run.
Typical scenarios
A useful replacement part for bars, restaurants, breweries, brewpubs, events and compatible home installations with a tap and a cooler with water bath.
It may be suitable for beer and other tap-dispensed beverages as long as the system uses recirculating cold water to keep the line stable.
Usage limit: this product is not a direct pump for beer or other beverages. It is intended for the circulation of chilled water within the cooling system.
Installation and considerations before buying
- Check that your cooler is compatible with the listed models or an equivalent ice-bank and water-recirculation system.
- Check the available power supply: 220 V / 50 Hz.
- Check whether you need 1 or 2 stages depending on the distance, resistance of the circuit and the demands of the cold-water return.
- Confirm that the 3 outlets and the 7 x 10 mm tube match your current circuit.
- Check whether your original assembly works with an external capacitor. This reference does not integrate it into the chassis.
- Before replacing it, it’s advisable to check the condition of the impeller, turbine, wiring, and existing connections.
- If you are not used to this type of spare part, installation by a service technician reduces assembly errors and subsequent downtime.
Recommended maintenance and use
For reliable operation, the agitator must run in a clean, unobstructed circuit. It is advisable to periodically check the condition of the bath water, accumulated dirt, impeller rotation, motor noise and the condition of the outlet tubes. Poor recirculation can lead to worse thermal stability in the line.
For replacement or inspection tasks, always disconnect the power supply and check the actual start-up of the assembly once mounted. If your system uses an independent capacitor, it is also advisable to check it when symptoms of irregular start-up or loss of performance appear.
Frequently asked questions
Is this agitator compatible with my cooler?
The listed compatible models are V-50, V-100, V-200, H-100 and H-200. For another model, confirm the dimensions, power supply, outlets and mounting system before buying.
Does it include a start capacitor?
No. This reference corresponds to the version without integrated capacitor. If your machine requires one, you must check the compatible capacitor or the agitator version with capacitor.
What’s the difference between 1 stage and 2 stages?
The difference lies in the pushing power available for recirculation. The choice depends on the distance and the demands of the cold‑water circuit.
Is it suitable for pumping beer or wine?
No. This agitator moves chilled water inside the cooling system. It is not a direct pump for the beverage.
What should I check before buying?
Machine model, electrical voltage, need for an external capacitor or not, number of outlets, tube size, impeller mounting and available space.
Is installation easy?
For a technician familiar with coolers and dispensing spare parts, it is usually a manageable replacement. If you do not know the circuit or the wiring, it is preferable to install it with technical support.
You may also be interested in
Shipping: check availability, lead time, and applicable cost before completing your order.
Terms: see the shipping, returns, and warranty pages for the applicable conditions.
Buy technical products with confidence
Confirm compatibility before purchasing
With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.
Connection
Thread, hose barb, push-fit connector, internal and external diameter.
Conditions
Pressure, gas, temperature, material and cleaning requirements.
Contents
Check which accessories, seals or adapters are included.