Pitón de contacto para cerveza y bebidas por grifo - Install Beer

Contact python for beer and beverages

1 product / meter
8.66€ EUR (10.47€ EUR IVA incl.)
Skip directly to product information
Pitón de contacto para cerveza y bebidas por grifo - Install Beer
Contact python for beer and beverages

Contact python for beer and beverages

IB0426
8.66€ EUR (10.47€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

Contact python for beer and beverages

1 product / meter

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656
Contact spout / irrigation for dispensing chilled beverages

Contact python for beer and other beverages on tap

The contact python is a professional solution for transporting cold beverages from the cooling machine or cold room to the tower or tap, maintaining the temperature better along the run. It integrates product lines and cold water irrigation lines within an insulated bundle, which is why it is widely used in beer, wine, vermouth, cider, kombucha, soft drink and other tap-dispensed beverage installations.

Venta por metros From 1 to 12 product lines With water lines for irrigation For professional installations

What is it and what is it used for?

The contact python, also known as irrigation python, is designed so that the beverage reaches the point of service in better thermal condition. To achieve this, the product lines run alongside recirculated cold water lines, all protected by external thermal insulation.

It is a common solution in bars, restaurants, brewpubs, beer halls, festivals, catering, trade fairs and any installation where there is some distance between the cooling equipment and the tap.

Important before buying

  • Sold by the metre.
  • The standard full coil is 50 metres.
  • The U-shaped water return is not included, unless expressly indicated.
  • Requires a cooling machine with pump or agitator that drives the irrigation water.
  • Available in different configurations according to the number of product lines.

Configuration of the cooling tube for water irrigation

In this spec sheet we clearly distinguish the type of inner tube intended for cold water recirculation according to the number of products in the python:

Python configuration Cooling tube for water recirculation Size Note
1- and 2-product python Clear PVC tube 7 x 10 mm Common solution in compact configurations with few lines.
Python for 3 or more products Poly 1/2" tube 9.5 x 12.7 mm Configuration used in higher-capacity pythons and more demanding technical runs.
The supplied technical data sheets confirm water lines in 7x10 mm clear PVC for compact configurations of 1 product + 2 water lines and water lines in Poly / polyethylene 9.5 x 12.7 mm (1/2") for higher configurations. :contentReference[oaicite:3]{index=3} :contentReference[oaicite:4]{index=4} :contentReference[oaicite:5]{index=5}

Recommended insulation according to number of products

Number of product tubes Recommended insulation Typical application
From 1 to 4 products 13 mm insulation Compact installations, bars with few lines and setups where a more contained system is desired.
5 products or more 19 mm insulation Installations with higher thermal load, more lines or runs where it is advisable to reinforce the insulation.

The insulation used in the technical variants provided is flexible closed-cell elastomeric foam, CFC-free and intended for the insulation and protection of pipes.

General technical features

  • Product type: contact/python / recirculation python.
  • Use: dispensing beer and other beverages chilled on tap.
  • Sales format: by the metre.
  • Standard coil: 50 m.
  • Configurations: from 1 to 12 product lines.
  • Assembly: internal lines grouped inside open insulation, bonded and closed with PVC tape.
  • Outer layer: black PVC jacket/tape depending on variant.
  • Not included: U-shaped return, unless expressly stated.

Aplicaciones habituales

  • Draft beer installations in bars, restaurants and brewpubs.
  • Bars with several taps and distance between the cold room or chiller and the tower.
  • Events, trade fairs, conventions and festivals with temporary bars.
  • Wine, vermouth, cider, kombucha or soft drink systems on tap.
  • Professional projects where technical order and thermal stability are required.

Quick guide to choosing your python

Need Recomendación orientativa
1 or 2 products Compact python with irrigation lines in 7x10 mm clear PVC and insulation of 13 mm.
3 or 4 products Python with irrigation lines in Poly 1/2" (9.5 x 12.7 mm) and insulation of 13 mm.
5 or more products Python with irrigation lines in Poly 1/2" (9.5 x 12.7 mm) and insulation of 19 mm.
Long run or warm environment It is advisable to review the chiller, the water recirculation, the insulation and the return accessories using sound technical criteria.

Recommended accessories for the water return

To correctly complete the installation of the contact python, you will usually need the water return U and, depending on the type of setup, the appropriate fixing accessories. Here are the direct links:

Plastic U Water return for python installations with a simple, functional solution. John Guest U fitting Optional U-shaped return with John Guest push-fit connection for clean, precise assemblies. Stainless steel ear clamps Recommended to ensure tube connections in beverage dispense installations.
If you’re not sure which return or clamp you need, it’s a good idea to check the exact size of the water tube and the product tube before placing your order.

Frequently asked questions

What’s the difference between the python for 1–2 products and the one for 3 or more?

In addition to the number of product lines, the type of water recirculation tube changes. In pythons for 1 and 2 products we use 7x10 mm clear PVC, while in pythons for 3 or more products we use Poly 1/2" tube (9.5x12.7 mm).

When should I choose 13 mm insulation and when 19 mm?

As a general rule in this spec sheet, 13 mm insulation is used in configurations of 4 products or fewer and 19 mm insulation in configurations of 5 products or more.

Does the product include the return U?

No. Unless expressly stated, the return U is not included. That’s why we’ve added to this page a block with links to the plastic U, the John Guest U and the recommended clamps.

Is it sold by the metre?

Yes. The contact python is sold by the metre. The usual full coil is 50 metres.

Is it only for beer?

No. Although it is a product widely used in beer installations, it can also be used for other beverages dispensed on tap that need to maintain temperature along the run.

Technical advice to choose the right python

At Install Beer we help you define the right configuration according to the number of products, distance, type of cooling, installation run and the accessories needed for water return.

  • Technical support for hospitality, bars, brewpubs, beer bars, events and custom projects.
  • Compatibility with towers, taps, coolers, keg couplers and tube accessories.
  • Solutions for beer, wine, vermouth, cider, cocktails, water and more beverages on tap.
Solicitar asesoramiento técnico Ver más tubo alimentario

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Essential accessories

You might also be interested in

Frequently asked product questions
Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.
What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.
Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.
What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.
Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.
How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.
What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.
Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.
How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.
Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.