Limpiavasos manual Delfin TS 1100 instalado en fregadero de barra - Install Beer

Delfin TS 1100 glasswasher

112.70€ EUR (136.36€ EUR IVA incl.)
Skip directly to product information
Limpiavasos manual Delfin TS 1100 instalado en fregadero de barra - Install Beer

Delfin TS 1100 glasswasher

IB0248
112.70€ EUR (136.36€ EUR IVA incl.)

Pickup available at Install Beer S.L.

Usually ready in 4 hours

View store information

Delfin TS 1100 glasswasher

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656
Bar hygiene

Delfin TS 1100 glass washer for fast, compact back-bar washing

The Delfin TS 1100 glass washer is a compact manual glass washer for bar and sink that cleans glasses with cold water, separates pre‑wash and rinse in a single bowl, and helps save up to 70% water in professional service.

What this manual glass washer offers

The Delfin TS 1100 is designed for bars with limited space that need to keep glass rotation agile without relying on a full‑cycle dishwasher. It fits especially well in bars, cafés, breweries and service points where the glass must be ready to use again in seconds.

Its compact format allows it to be installed inside the sink and to work with separate prewash and rinse in a single bowl. This improves operational hygiene, reduces consumption and avoids unnecessary waiting times at peak hours.

In addition, because it works with cold water and integrated brushing, the glass can be reused immediately. It is a very useful solution when the goal is to maintain service flow, good glass presentation and a consistent daily cleaning routine.

Key data

FormatCompact sink model
Glass capacityUp to 20 cm internal depth
Jarras con asaUp to 0.5 liters
Power consumptionAhorro de agua de hasta el 70 %
Power supplyNo requiere electricidad
NormativaTrabajo en un seno según TRSK 400

Important: before buying, it’s advisable to check the size of the sink and the type of glass you’ll be washing daily.

Main features

  • Compact Takes up little space and adapts well to bars with standard sinks.
  • Water saving Reduces consumption by up to 70% compared with conventional continuous rinsing.
  • Cold-water washing Glasses are ready to go back into service with no waiting time.
  • 360° swivel connection Makes it easier to orient the water inlet according to the sink position.
  • Dirt‑resistant surface Improves exterior cleaning and preserves the equipment.
  • Rounded, encapsulated body Reduces dirt traps and makes daily hygiene easier.
  • Inner brush with bayonet fitting Allows quick disassembly for maintenance or replacement.
  • Removable overflow Makes it easier to empty and clean the tank.

Technical specifications

Confirmed technical data for the Delfin TS 1100 glass washer
Parameter Detail
Brand DELFIN
Fabricante / marca comercial Fuchs Gastronomiebedarf GmbH / DELFIN
Model TS 1100
SKU IB0248
MPN / Art.Nr. 8010
GTIN / EAN 4000948008010
Equipment type Limpiavasos manual de bar para fregadero
Material Plastic
Color / finish Gray
Dimensions 37 x 30.7 x 18.5 cm (width x height x depth)
Weight 2.5 kg
Capacidad de uso Glasses with internal depth up to 20 cm and handled jugs up to 0.5 l
Sistema de lavado Separate pre‑wash and rinse in a single sink compartment
Consumo de agua Ahorro de hasta el 70 %
Temperatura de trabajo Lavado / aclarado con agua fría
Power supply Not required
Conexión de agua 360° swivel connection; 3/8 BSP thread
Sink compatibility Fregaderos comerciales estándar; se cita compatibilidad con 50x30, 40x40 y 40x30 cm
Scope of supply Equipo limpiavasos completo; accesorios exactos no detallados
Certificaciones / cumplimiento TRSK 400; the DELFIN TS range indicates compliance with EU food guidelines and KTW/DVGW hoses

Compatibility and use cases

It is compatible with hospitality bars and beverage service stations where there is a water connection and a sink. It fits well in beer, wine, vermouth, soft drink, cocktail, kombucha or water setups, because its function focuses on glass hygiene and does not depend on the type of drink served.

Given its dimensions and format, the TS 1100 is aimed at commonly used glasses, simple wine glasses and handled mugs up to 0.5 litres. If your main service includes tall glasses, large goblets or 1‑litre mugs, it is worth considering the TS 2100 or TS 3100.

It can be complemented with detergent capsules or powders for Delfin glass washers, replacement brushes and bar cleaning kits. It does not require electrical power, but you do need a water supply and enough space in the sink bowl.

Installation and considerations before buying

  1. Check the actual space in the sink before buying and allow room to manoeuvre the glass comfortably.
  2. Check the type of glasses you use most: if they exceed 20 cm internal depth or you use large jugs, this model may be too short.
  3. Confirm the available water supply and the route of the connection, although the 360° inlet helps to orient the setup more easily.
  4. Also plan for consumables and replacement brushes.
  5. It is a simple installation, but in professional bars it is advisable to integrate it so that it does not interfere with the drain, tap and service workflow.

Recommended maintenance and use

To preserve the performance of the TS 1100, it’s advisable to empty the tank, rinse the unit and clean the brushes frequently. The removable overflow and quick bayonet closure simplify these tasks and help prevent build-up of dirt, grease or lipstick residue.

Regular use of specific glass‑washer detergent and periodic replacement of the brushes improves glass cleanliness, protects the head and reduces residual odours or flavours in beer and other beverage service.

Frequently asked questions

What type of glasses is the Delfin TS 1100 designed for?

It is designed for glasses with an internal depth of up to 20 cm and handled mugs up to 0.5 litres.

¿Necesita electricidad?

No. Funciona con toma de agua y lavado con agua fría.

Can it be installed on any bar?

There must be a sink and enough space. It fits standard commercial sinks, but it’s advisable to check dimensions before buying.

Is it suitable for professional beer and beverage service?

Yes. It is a valid glass hygiene solution for beer, wine, vermouth, soft drinks, cocktails and other beverages served at the bar.

What maintenance does it need?

Frequent cleaning of the tank, rinsing of the unit, and inspection or replacement of brushes and specific detergent when required.

When is it advisable to choose a higher‑end model?

When you work with tall glasses, large goblets or 1‑litre mugs, or when you need more format versatility.

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Essential accessories

You might also be interested in

Frequently asked product questions

Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.

What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.

Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.

What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.

Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.

How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.

What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.

Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.

How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.

Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.