Type G DSI keg coupler

Type G DSI keg coupler

Head only
50.22€ excl. VAT 60.77€ VAT incl.
Skip directly to product information
Type G DSI keg coupler

Type G DSI keg coupler

IB0130
50.22€ excl. VAT 60.77€ VAT incl.
VAT depends on destination: mainland Spain and Balearic Islands 21%; Canary Islands are outside EU VAT. Final tax is calculated from the delivery address at checkout.
Shipping calculated at checkout.
Model
Shipping information Request technical advice

DSI keg coupler type G

Dispense coupler for kegs fitted with the specified valve.

Choosing a variant

VariantWhat’s included
Head only
IB0130
Coupler only
Pack with 3/8" John Guest fittings
PK0045
Coupler and John Guest fittings for 3/8″ tubing
DeLuxe pack with 3/8" John Guest
PK0046
Coupler, brass John Guest fittings and protective springs for 3/8″ tubing

Compatibility

DSI identifies this system as Trilobe type (Grundy).

Brand examples: Moritz, Budweiser, Estrella Damm, Estrella de Galicia. Check the keg valve type before ordering. The brand alone does not establish compatibility.

Installation

With the lever raised, place the coupler on the valve, turn it until secure, then press the lever down until it locks.

Good practice

The coupler can be dismantled for cleaning and maintenance. Metal hose tails are sold separately.

DSI recommends sanitising the mating face at each keg change and dismantling the coupler for a full clean weekly when the keg is refrigerated. Clean more often if the keg is stored somewhere warm.

Tools and documentation

Frequently asked questions

Which measurements should I check before choosing fittings?

Check the threads of both connections and the tubing outside diameter. The John Guest packs on this page are for 3/8″ tubing.

Technical information

BSP threads on the coupler offered: 1/2″ × 1/2″.

Metal body with stainless-steel components, EPDM seals and check valves for gas and beverage.

Technical information

Information to choose, install and maintain this product

Keg coupler for kegs fitted with the specified valve.
Compatibility
DSI identifies this system as Trilobe type (Grundy).
Brand examples: Moritz, Budweiser, Estrella Damm, Estrella de Galicia. Check the keg valve type before ordering. The brand alone does not establish compatibility.
Technical specifications
Thread
Gas inlet 1/2″ BSP and beverage outlet 1/2″ BSP
Connection
Type G keg coupler (Grundy)
Installation and commissioning
With the lever raised, place the coupler on the valve, turn it until secure, then lower the lever until it locks into place.
Maintenance
The coupler can be dismantled for cleaning and maintenance. Metal hose barbs are sold separately.
DSI recommends sanitising the coupling face at every keg change and dismantling the coupler for a thorough clean every week if the keg is refrigerated. Shorten the interval if the keg is stored in a warm place.
The DSI manual specifies cleaning brush 550395 for the body and piston of this system. After brushing, it instructs you to rinse the components with clean water and inspect the seals.
Product FAQs
What should I measure before choosing fittings? Check the thread on both connections and the outside diameter of the tube. The John Guest kits on this page are for 3/8″ tubing.

Useful accessories and add-ons

Check the correct connections and sizes.