Two‑stage pressure regulator

Two‑outlet pressure regulator for CO2 gas cylinder

Optimize beer dispensing with our dual CO2 regulator. Manual adjustment, brass and stainless-steel construction, and thermal-insulating cap. Ensures consistent carbonation and prevents excessive foam. Compatible with John Guest 3/8" outlets or 8 mm barbs.

The pressure regulator or gauge regulates the pressure from the gas cylinder (high‑pressure source) and connects it to the beer keg, via the keg valve (reducing the pressure). When a specific pressure is recommended, it is usually stated. The gas regulator has a manual adjustment screw or knob to set the amount of pressure supplied to the keg.

The gas regulator is vitally important for maintaining the correct CO2 level in beer. Too much CO2 can add excess CO2 to the beer and cause foaming and over-carbonation issues, while too little CO2 pressure can release the CO2 from the beer itself, resulting in flat beer with little or no gas/head.

NSF61-certified food-grade galvanic coating – SK approval.

Stamped brass body with built-in safety valve and PTFE sealing gasket.

Interior of the high-pressure valve made of AISI 300 stainless steel.

Thermal-insulating synthetic resin cap that improves and optimizes regulator performance by preventing freezing and avoiding annoying condensation build-up.

Discover all our regulators.

High-pressure gauge: 0–250 bar

Low-pressure gauge: 0–10 bar (factory set to 7 bar)

Available outlets: 8 mm metal barb / 3/8" John Guest push-fit connection

Dimensions: 21.8w-14fil.x1″ CH.30 - 250x200x100 mm

The hose for the pressure regulator is not included; it comes standard with a fixed arm. A version with hose is available as an extra.