Skip directly to product information
Cellarbuoy detector de espuma SAFEFOB-Install Beer
  • Cellarbuoy detector de espuma SAFEFOB-Install Beer
  • Cellarbuoy detector de espuma SAFEFOB-Install Beer
  • Cellarbuoy detector de espuma SAFEFOB-Install Beer
  • Cellarbuoy detector de espuma SAFEFOB-Install Beer
  • Cellarbuoy detector de espuma SAFEFOB-Install Beer
  • Cellarbuoy detector de espuma SAFEFOB-Install Beer
  • Cellarbuoy detector de espuma SAFEFOB-Install Beer
Cellarbuoy SAFEFOB foam detector

Cellarbuoy SAFEFOB foam detector

PK0189
56.73€ EUR (68.64€ EUR IVA incl.)

Fast and secure shipping (24h express)

Flexible returns (14-day period)

3-year warranty (6 months for businesses)

Cellarbuoy SAFEFOB - Foam detector for cold room

The CellarBuoy SafeFob foam detector offers superior safety and is vital for controlling foam when dispensing beer and kegged beverages to tap, ensuring impeccable, satisfying service.

The Cellarbuoy* SAFEFOB (Fob Detector, beer monitor) is a mechanical device designed to keep beer lines balanced and stable (circuit full of keg beer ready to dispense) by preventing gas from entering the beer line when the keg is empty.

It prevents excess gas in the line and therefore significantly reduces beer waste and downtime when changing kegs. The bottom of the float has a conical base to seat the ball at the bottom, preventing the float from drifting off center in the Cellarbuoy.

Purge button valve to release excess gas. Prevents accidental emptying of the new keg thanks to the automatic spring‑loaded shut‑off.

Cellarbuoy keg-change instruction manual

With safety auto‑shutoff for purging.

Purge valve with auto shut‑off.

Dispensing capacity for multiple taps.

Chamber volume 4 fluid ounces (118 ml).

Side inlet, beer outlet at the bottom.

Stainless steel ball in plastic with integral lock for easy cleaning.

Solid plastic construction.

Operates up to a pressure of 100 PSI (7 Bar)

Two‑piece set for easy cleaning and maintenance.

Dimensions: 95 x 280 x 80 mm.

Connections: beer inlet 3/8", beer outlet 3/8" and purge outlet 3/16"

Includes one meter of 3/16" tubing for purging the Cellarbuoy.

*It is recommended to keep Cellarbuoys constantly chilled in a cold room or refrigerator.

When the beer stops coming out of the tap, it means the keg is empty. Then you must disconnect the empty keg and connect a full one.

1st - Purge the CellarBuoy through the small valve located at the top.

2nd – Make sure the cellarbuoy container is filled to the top and close the valve after use.

3rd - Press the release button upwards to purge the contents.

4th - Check that the ball rises to the top of the cellar buoy container.

5º – When the Cellarbuoy container is full and the ball is at the top, pull the release button down to the lower position.

6º – Check that you do not leave the ball release button in the upper (purge) position.

You might also like

Frequently asked questions
Is this product compatible with my setup?

It depends on the type of connector/head, threads, and tube diameter. If you provide us with your configuration or send us a photo, we can confirm compatibility.
What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.
Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.
What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.
Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.
How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.
What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.
Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.
How often should I check or replace gaskets and consumables?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.
Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.