Skip directly to product information
Dispensador de cerveza bajo barra DryWet 70K H4 - Install Beer

DryWet 70K H4 under-counter beer dispenser

PK0193

Product available on request

Request information

Approximate delivery in 3 to 4 weeks

Original European product, 100% quality

DryWet 70K H4 undercounter beer dispenser that combines dry cooling and chilled water circulation all the way to the tap for 2 lines.

Approximate delivery time up to 4 weeks

Manual de usuario de dispensadores Lindr

DryWet 70K H4 dispenser datasheet

The DryWet 70/K H4 is a compact high‑performance undercounter cooler designed for bars with limited space and for mobile installations (food trucks, boats or mobile bars), because it uses “dry” cooling technology with an after‑cooling/recirculation pump and no open water bath, preventing spills and simplifying operation. It can chill two beverages at the same time, and the manufacturer states it can be ready to serve 5–10 minutes after switch‑on.

Por qué te lo recomendamos:

  • 2 lines / 2 drinks with long coils: 2 × 16 m.
  • Professional flow rate: 70 l/h continuous and 90 l/h maximum (0°C / Tk 45°C).
  • No open water bath: ideal for environments with movement and risk of spills.
  • “K” model: integrated air compressor with automatic pressure regulation 2.8–3.2 bar.
  • Green Line (R290): eco refrigerant; the manufacturer associates the Green line with efficiency/consumption improvements.

Main features

  • DryWet technology: combines dry cooling with a recirculation pump to keep the temperature stable right up to the tap.
  • Fast start-up: cold drinks ready in 5–10 min according to the manufacturer (reduces the time after connecting the keg).
  • Compact undercounter design in its performance class (aimed at tight spaces).
  • Easier maintenance: service doors for access to components and cleaning.
  • Optional castors to make handling and moving easier.
  • Simple control: manual thermostat to set serving temperature.

Connections (fittings)

  • Drink: 9.5 mm (3/8")
  • Air (integrated compressor): 8 mm (5/16")
  • Recirculation connection: 1/2"

Technical specifications

  • Cooling compressor: 1/3 HP and 860 W
  • Maximum capacity (0°C / Tk 45°C): 90 l/h
  • Continuous output: 70 l/h
  • ΔT (temperature gradient): 10°C
  • Number of chilled drinks: 2
  • Coils: 2 × 16.0 m, diameter 8 × 0.5 mm
  • Air compressor: Yes, automatic 2.8–3.2 bar
  • Temperature control: 2–8 °C
  • Internal tank volume: 0.8 L
  • Recirculation pump (head): 4 m
  • Electrical power: 621 W at 2.70 A
  • Refrigerante: R290 (Green Line)
  • Voltage: 220–240 V at 50 Hz ~1
  • Net weight: 35 kg

Dimensions (approx. according to diagram)

  • Width: 465 mm
  • Depth: 538 mm
  • Height: 597 mm

What’s included / what comes as standard?

  • DryWet 70/K H4 cooler with manual thermostat
  • Integrated air compressor with automatic regulation (K model).
  • Service doors for access and maintenance.

Recommended for:

  • Bars with limited undercounter space that need two lines with serious flow.
  • Mobile installations (food truck, boat, temporary bar) where a system without an open bath avoids problems caused by movement.

You might also like

Frequently asked questions

Is this product compatible with my setup?

Depende del tipo de conector/cabezal, roscas y diámetro de tubo. Si nos indicas tu configuración o envías una foto, te confirmamos la compatibilidad.

What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.

Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.

What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.

Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.

How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.

What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.

Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.

¿Cada cuánto debo revisar o sustituir juntas y consumibles?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.

Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.