Skip directly to product information
Dispensador de cerveza CWP 200 móvil de 2 grifos - Install Beer

CWP 200 Mobile Beer Dispenser with 2 taps

PK0200

Product available on request

Request information

Approximate delivery in 3 to 4 weeks

Original European product, 100% quality

CWP 200 mobile beer dispenser with two taps. Mobile event unit with tower and advertising panel

Manual de usuario de dispensadores Lindr

Lindr CWP200 dispenser datasheet

The CWP 200 MOBIL NEW (2 taps) is a mobile draft unit designed for events, trade fairs and temporary services where you need high flow and easy setup. It uses CWP (Contact Water Power) technology, which combines the advantages of contact and water cooling: the evaporator acts directly on the beverage line to react quickly when the serving pace increases. The manufacturer indicates a cooling time of ~30–40 min from switch-on (depending on conditions).

Por qué te lo recomendamos:

  • 2 taps / 2 lines to serve two drinks (or two beers) at the same time.
  • Professional output: 120 l/h continuous and 140 l/h maximum (0°C / Tk 45°C).
  • CWP Thermoblock: designed to maintain constant temperature even with peak flow rates.
  • Green Line (R290): eco refrigerant; the manufacturer states +20% efficiency and -20% consumption in this line.
  • True mobility: castors + side handles + integrated tray for events.

Main features

  • CWP (Contact Water Power) technology: “hybrid” design (contact + water) for immediate response when flow increases.
  • No ice required (does not need ice input to operate like classic ice‑bank systems).
  • Integrated recirculation pump (stated reach: 6 m) to help maintain the cold all the way to the tower/tap.
  • Service tower with advertising area (plate/medallions and backlit panel on the MOBIL series).
  • Easy maintenance access (practical door and service‑oriented design).
  • Drain valve + water level indicator to empty the tank and easily check the water level.
  • Drip tray with drain hose (very useful at events).

Connections

  • Beverage connection: 9.5 mm (3/8") speedfit quick connector
  • Keg pressure: this model does not include an integrated air compressor. It is normally used with external CO₂ and a regulator.

Technical specifications

  • Cooling compressor power: 3/4 HP · 1550 W
  • Maximum capacity (0°C / Tk 45°C): 140 l/h
  • Continuous output: 120 l/h
  • ΔT (temperature gradient): 10°C
  • Ice bank: 0–5 kg (unit range)
  • Recirculation pump (reach): 6 m
  • No. of taps / drinks: 2 / 2
  • Coils: 2 × 20 m · Ø 7×8 mm
  • Power consumption: 805 W · 3.50 A
  • Refrigerant: R290
  • Voltage: 220–240 V · 50 Hz ~1
  • Net weight: 51 kg
  • Digital thermostat: Yes

What’s included?

  • Service tower with advertising area (medallions / panel).
  • Wheels and handles for transport.
  • Integrated drip tray with waste outlet.
  • Coils + quick speedfit connectors.
  • Termostato para regulación precisa.

Recomendado para:

  • Festivals, fairs, catering, clubs, sports venues and temporary bars with high turnover.
  • Setups where mobility matters and the unit must be “ready to work” with drip collection and drainage.

You might also like

Frequently asked questions

Is this product compatible with my setup?

Depende del tipo de conector/cabezal, roscas y diámetro de tubo. Si nos indicas tu configuración o envías una foto, te confirmamos la compatibilidad.

What measurements should I check before buying?

Thread type, inner/outer tube diameter, fitting type (quick-connect/barb/threaded), and whether it’s for beer, gas, or water line.

Does it include gaskets, clamps, or the necessary accessories?

The description specifies what is included. If you need additional seals or accessories, we’ll recommend compatible options.

What material is it made of and what use is it recommended for?

The material (stainless steel, brass, etc.) is designed for food-grade and dispensing use. If you’re going to use it with another beverage or under special conditions, we’ll advise you.

Is it easy to install? What tools do I need?

It’s usually a straightforward installation, but we recommend a clean cut on the tubing, proper tightening, and leak testing. We’ll indicate the method according to the type of connection.

How do I know if the thread or fitting is the right one?

The key is to identify your system’s thread standard and connection type. If you’re unsure, send us a photo of the current part and we’ll help you choose.

What should I do if I have leaks after assembling it?

It’s usually due to a worn gasket, incorrect measurement, poorly cut tubing, or insufficient sealing. We’ll help you diagnose and fix it.

Does this component affect foam or serving flow rate?

Yes, some components affect flow and stability. If you’re having issues with foam or flow rate, we’ll help you balance pressure, temperature, and line.

¿Cada cuánto debo revisar o sustituir juntas y consumibles?

It depends on usage and cleaning, but it’s advisable to check them regularly to avoid leaks and maintain a stable, hygienic service.

Do you offer technical support and international shipping?

Yes. We advise you before and after purchase and provide technical service. We also ship throughout Europe and to North, Central, and South America.