Application
Beverage, location, expected flow and installation type.
Lindr Pygmy Pro Kitchen Beer Dispenser
Skip directly to product information
1,376.55€
excl. VAT
1,665.63€
VAT incl.
VAT depends on destination: mainland Spain and Balearic Islands 21%; Canary Islands are outside EU VAT. Final tax is calculated from the delivery address at checkout.
Lindr Pygmy Pro Kitchen Beer Dispenser
PK0157
Shipping calculated at checkout.
Pickup available at Install Beer S.L.
Usually ready in 4 hours
Lindr · Pygmy Pro Kitchen · built-in · air compressor
Premium built-in Lindr Pygmy Pro Kitchen dispenser for kitchen and bar
The Lindr Pygmy Pro Kitchen is a built‑in dispenser with 1 tap and integrated compressor, 25 l/h continuous output and a design for a 45 cm kitchen module, intended for serving beer and other cold drinks in kitchens, bars, or premium spaces with a stainless‑steel and tempered‑glass finish.
Designed for to recess into countertop or bar. Requires compatible coupler, a suitable keg and proper planning of interior space, ventilation and tube routing.
What this product offers
The Lindr Pygmy Pro Kitchen is not a portable tower as such, but a premium built-in solution for those who want to integrate a real dispensing system into a modern kitchen, a designer bar or a domestic or professional space where aesthetics matter as much as functionality.
The manufacturer presents it as a unit designed for a 45 cm kitchen module, with built‑in construction, quiet operation, an air intake protected by a particle filter, and a top finished in black tempered glass that gives it a clearly superior look to a conventional dispenser.
Operationally, it combines a clean installation with an integrated air compressor, 25 l/h continuous, 35 l/h maximum, temperature control via an elegant panel and a tower with a stainless‑steel tap, allowing you to serve not only beer but also wine, cider, water or cocktails in a concept strongly geared towards premium kitchens, garden kitchens or designer bars.
Continuous performance
25 l/h for stable service in the kitchen, bar or premium environment.
Maximum capacity
35 l/h at 0 °C / TK 45 °C.
Integrated compressor
Yes, with automatic pressure from 2.8 to 3.2 bar.
Settings
1 tap and 1 cold drink.
Kitchen module
Designed to be built into a 45 cm wide module.
Connections
3/8 beverage and 5/16 air with quick connector.
Finish
Stainless steel and black tempered glass.
Important detail
The tower with stainless steel tap also allows you to work with wine, cider, water or cocktails if the system is compatible.
Main features
Built-in construction
Designed to be integrated into a countertop or bar with a clean, professional look.
45 cm kitchen module
The manufacturer indicates compatibility with a 45 cm wide kitchen module.
Built-in air compressor
It simplifies installation and avoids always having to rely on an external cylinder in simple configurations.
25 l/h continuous and 35 l/h maximum
Real performance for the kitchen, premium home bar, garden kitchen, or moderate service.
Quiet operation
The design aims for sufficient airflow and quiet operation to blend better into interiors.
Particle filter
The air intake is protected by a specific filter located at the bottom of the unit.
Elegant control panel
It allows you to set the temperature in a clear way that is visually consistent with a premium kitchen or bar.
Stainless steel tower and tap
The stainless-steel tap allows you to work not only with beer, but also with other compatible drinks.
Premium finish
The combination of stainless steel and black tempered glass enhances both aesthetics and durability.
Technical specifications
| Specification | Detail confirmed |
|---|---|
| Brand | Lindr |
| Model | PYGMY PRO KITCHEN GREEN LINE |
| SKU | PK0157 |
| MPN | LCH 02250 |
| Equipment type | Built-in dispenser for beer and other beverages with integrated compressor |
| Number of taps | 1 |
| Number of cold drinks | 1 |
| Maximum capacity | 35 l/h |
| Continuous performance | 25 l/h |
| Thermal gradient ΔT | 10 °C |
| Compressor power | 1/8 HP · 280 W |
| Electrical power | 322 W |
| Current draw | 1.40 A |
| Power supply | 220-240V 50Hz~1 |
| Integrated air compressor | Yes |
| Air compressor pressure | Automatic 2.8–3.2 bar |
| Coil length | 11.5 m |
| Coil diameter | 7 x 8 mm |
| Beverage connection | Speedfit 9.5 mm (3/8") |
| Air connection | Speedfit 8 mm (5/16") |
| Compatible kitchen module | 45 cm wide |
| Approximate dimensions of the sketch | Top front width 354 mm, base width 350 mm, body depth 397 mm, total depth approx. 433 mm and total height approx. 440 mm |
| Net weight | 21.5 kg |
| Materials | Stainless steel and black tempered glass; tower and tap in stainless steel |
| Refrigerant | R290 |
| Finish | Premium / Green Line |
| Content confirmed | Install Beer states that it includes beverage and air lines and the necessary John Guest connectors |
| Customisable options | The manufacturer indicates tap selection: no; stainless beverage thread: no; stainless air thread: no; cable plug: yes |
| General compatibility | 3/8" beverage line, 5/16" air line, compatible keg coupler and keg or beverage suited to the system |
| Certification / regulations | The manufacturer indicates compliance with Czech and European safety and hygiene standards |
Compatibility and use cases
The Pygmy Pro Kitchen works with a 3/8" beverage outlet and a 5/16" air outlet, and has been designed for a single cold beverage line in a built-in configuration: under-counter unit + tower with tap + beverage line + air line from the integrated compressor + compatible head + keg or beverage source.
Its natural place is in modern kitchens, kitchen islands, designer bars, garden kitchens, showrooms, premium residential hospitality, wine corners, and mobile bars. The manufacturer’s own materials present it as a unit suitable not only for the kitchen, but also for designer or garden bars.
In addition to beer, the manufacturer states that the stainless steel tap can also be used with wine, cider, water or even cocktails, provided that the circuit, pressure, hygiene and preservation system are compatible with the chosen drink.
Installation and considerations before buying
- Check the built-in module: the manufacturer recommends installing it in a 45 cm wide kitchen unit.
- Check the undercounter space: in addition to the main unit, you need to allow for tubing runs, tap, keg or supply system, and maintenance access.
- Check the actual dimensions on the diagram: especially total height, body depth, and total depth with the tower.
- Ensure ventilation and airflow: the machine is designed to work with protected air intake and quiet operation, but it requires an installation that does not block ventilation.
- Confirm the correct coupler: you need the model compatible with the keg valve or beverage system you’re going to serve.
- Check connections and sizes: beverage in 3/8 and air in 5/16. If your setup uses other sizes, you’ll need a compatible adapter.
- Consider whether you will work with the built-in compressor or with CO₂: it includes a compressor, but depending on the beverage, storage and project, another configuration may be preferable.
- Optional cabinet: the manufacturer shows an optional wooden cabinet; it should not be assumed to be included unless expressly confirmed.
Recommended maintenance and use
In a built-in unit, performance depends not only on cooling capacity, but also on line cleaning, condition of the tap head, actual ventilation of the cabinet, correct pressure and condition of the particle filter. Keeping the air inlet clear and the lower area of the unit accessible is especially important to ensure stable and quiet operation.
The manufacturer emphasizes the importance of the quality of the beverage served and therefore integrates a particle filter and a molecular filter in its design. As with other Lindr equipment, it is important to follow the instructions in the manual regarding disconnecting the power before cleaning or maintenance and handling the refrigeration circuit, since it uses R290.
Frequently asked questions
Does the Lindr Pygmy Pro Kitchen have a built-in air compressor?
Yes. It includes an integrated air compressor with automatic pressure of 2.8–3.2 bar.
Is it designed to be built into a kitchen unit?
Yes. The manufacturer defines it as a built-in unit and recommends it for a 45 cm kitchen module.
Does it include the keg coupler?
The Install Beer spec sheet does not indicate that it is included. It does list the required beverage and air lines and John Guest connectors, so it is advisable to choose the compatible coupler separately if you are not buying a complete package.
Is it only for beer?
No. The manufacturer states that the stainless steel tap can also be used with wine, cider, water or even cocktails, as long as the system is compatible with the beverage.
Is it only for the kitchen or can it be used in other spaces?
It’s not just for the kitchen. The manufacturer also proposes it for designer bars, garden kitchens or mobile bars, as long as the installation is properly executed.
What do I need to check before buying it?
You must check the 45 cm module, the actual dimensions on the diagram, the cabinet ventilation, the compatible coupler, the space for tubing and keg, and the beverage you are going to serve.
Downloadable
Shipping: check availability, lead time, and applicable cost before completing your order.
Terms: see the shipping, returns, and warranty pages for the applicable conditions.
Buy technical products with confidence
Confirm compatibility before purchasing
With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.
Connection
Thread, hose barb, push-fit connector, internal and external diameter.
Conditions
Pressure, gas, temperature, material and cleaning requirements.
Contents
Check which accessories, seals or adapters are included.