Beer taps for dispensing drinks
If you’re looking for a beer tap for home, you’re in the right place. At Install Beer we’ve been installing beer taps for homes, bars and many other projects, such as the Barcelona Beer Festival, the most important beer event in southern Europe, for more than 20 years.
The beer tap you can install at home is exactly the same as a professional beer tap, so there’s no difference at all in quality between one and the other, although the column for home use is usually 1 or 2 beer taps, unlike the ones we typically install in projects like brewpubs, where the number of taps can range from 1 to more than 30 taps.
Bear in mind that not all the beer tap installations we set up are on a column, as they can also be mounted directly on the wall. It will all depend on the space and the characteristics of your premises. Most of the wall‑mounted installations we do have the cold room with the kegs located right behind them. In this case, there’s no need to install any type of font, saving the cost of the beer tower and the cooler, since the kegs are already in a cold room.
As you can see, there are many options and we love new projects, so we’re delighted to hear your ideas.
Beautiful chrome‑finished column for 1, 2 or 3 taps. The thread for the tap is ½”.
Tubular chrome column with logo medallion; the thread for the tap is ½”.
T‑shaped column made of stainless steel with logo medallions for 3 or 4 taps.
Fantastic multi‑tap bridges in stainless steel with a wide range of finishes, from a few taps up to 30 taps.
In our columns section you can also find our pre‑installed column packs. These packs are prepared by our technicians and shipped ready for the customer, who only has to connect a few final parts to start enjoying their beer column.
Column set with all the necessary materials and pre‑assembly, ready to install and serve.
Roma column set with all the necessary materials and pre‑assembly, ready to install and serve. Everything with John Guest quick‑connect fittings.
3‑ or 4‑tap column with all the installation done, including the drip tray with glass rinser, ready to install on site and serve.
At Install Beer we have our own technical service and offer personalised support we’re very proud of. All this means our customers are highly satisfied and we’re a benchmark in the beer sector.
If you already have your beer column, you should check whether the tubing and fittings you have are compatible with your new equipment. To do so, you can take a look at our section on tubing and quick connectors (link). If you’re not sure what to do, you can contact us or use our beer tap rental service.
We have complete, portable systems available for events and parties; you can find more information in our beer tap rental section.
Dual‑layer tubing whose inner wall has almost no roughness and practically prevents migration. Very good flexibility, long life and resistance to high pressures and various chemical agents. Specially designed for soft‑drink and beer dispensers.
Suitable for beverage handling and the food industry in general, wherever high safety pressure and mechanical strength are required. Ideal for transferring liquids with high acidity and alcohol (up to 15%).
Single‑use stainless steel clamp with ear‑type closing control.
Tubing made up of Lupulus tube and glass tube for cooling, all inserted inside Armaflex insulation.
Yes, draft towers can be used for any beer, although it’s true that some beers, such as Guinness, require a tap with a restrictor plate. But except for rare cases like this, a draft tower will work for any beer.
If we refer exclusively to a professional draft system, it consists of the beer tower, the beer tap and the internal tubing. On top of that, we can add the tower support and drip tray.
We offer both options: you can choose the beer tower with or without pre-installation. In our Draft beer and beverage section you can find the tower without pre-assembly or tower packs that include pre-assembly.
This depends entirely on the needs and features the customer wants for their venue. There are towers from 1 tap up to 30 taps or more, and there are also different finishes and installation types: with base, through-hole, or wall/ceiling mounted. The customer should choose the tower that best suits their premises, both in terms of the number of taps and aesthetics. At Install Beer we are experts in advising on tower installations, so don’t hesitate to contact us.