John Guest tube cutter

John Guest tube cutter

¥1,199 JPY
Skip directly to product information
John Guest tube cutter

John Guest tube cutter

IB0240
¥1,199 JPY
Import costs for Japan Duties (tariffs), import VAT/taxes and carrier fees for clearance, brokerage or advancing funds may apply. Only amounts expressly collected at checkout are included; other charges may be requested before delivery.
Shipping calculated at checkout.
Shipping information Request technical advice

John Guest tube cutter

Manual tool for preparing flexible tubing before fitting it into push-fit connectors. A clean, square cut helps the tube insert correctly and allows the sealing area to work on an even surface.

Compatibility and what’s included

For preparing flexible tubing for push-fit fittings. Check that the outside diameter of the tube matches the fitting. The tube cutter is supplied.

Why a good tube cut matters

An angled, crushed, scratched or burred end can make insertion difficult and contribute to sealing problems. Cutting with a suitable tool reduces these errors.

How to use it

Mark the cutting point, place the tube perpendicular to the blade and make a clean cut without twisting it. Before connecting, visually inspect the end and discard any deformed section.

Good practices

Do not use a damaged blade and avoid crushing the tube while cutting. Keep the tool clean and protected when not in use.

Frequently asked questions

Why not cut with any tool?
Because an irregular cut can affect the assembly of a push-fit connection.

Should the cut be square?
Yes.

What if the tube becomes oval?
Cut back to an undamaged section before connecting it.

Is it suitable for preparing John Guest installations?
Yes, it is intended to help prepare tubing correctly.

Technical information

Information to choose, install and maintain this product

Manual tool for preparing flexible tubing before fitting it into push-fit connectors. A clean, square cut helps the tube insert correctly and allows the sealing area to work on an even surface.
Technical specifications
Tube size
Up to 12 mm outside diameter for soft tubing
Connection
Cutting soft tubing
Manuals and downloads
Product FAQs
Why not cut with any tool?
Because an irregular cut can affect the assembly of a push-fit connection.
Should the cut be square?
Yes.
What if the tube becomes oval?
Cut back to an undamaged section before connecting it.
Is it suitable for preparing John Guest installations?
Yes, it is intended to help prepare tubing correctly.
John Guest fitting guide
John Guest BSP/BSPT female adapter
Official John Guest catalogue (PDF, Spanish) · TSNIP

Useful accessories and add-ons

Check the correct connections and sizes.