Skip directly to product information
Bulkhead fittings - BSP Thread
IB0419
$5.56 USD
Import costs for Panama
Duties (tariffs), import VAT/taxes and carrier fees for clearance, brokerage or advancing funds may apply. Only amounts expressly collected at checkout are included; other charges may be requested before delivery.
Shipping calculated at checkout.
John Guest push-fit bulkhead union
Joins two tubes of the same outside diameter through a panel. Both ports are push-fit and the external thread and locknut secure the body to the panel.
Variants
| Outside diameter of both tubes | John Guest | SKU |
|---|---|---|
| 3/8″ | PI1212S | IB0418 |
| 5/16″ | PM1208S | IB0419 |
| 1/2″ | PI1216S | IB0417 |
| 12 mm | PM1212E | JG0050 |
Installation
Depressurise the circuit. Check the drawing for the hole size and secure the fitting with its locknut. Cut the tubes square, insert them fully and check for leaks.
Technical documentation
- Grey acetal imperial data sheet (PDF) · PI1212S, PM1208S, PI1216S
- Metric dimensional data sheet (PDF) · PM1212E
- John Guest technical catalogue (PDF) · PI1212S, PM1208S, PI1216S, PM1212E
- John Guest fittings guide
Technical information
Information to choose, install and maintain this product
Bulkhead fitting to pass through a panel or surface and provide a neat transition between tubing and a BSP threaded connection.
Typical applications
- Useful in equipment panels, bars, technical cabinets or enclosures where the tubing must pass through a surface without being loose in the opening.
Technical specifications
Select a variant to see its technical specifications.
- Tube size
- 5/16″ (tube)
- Thread
- Connection
- Tube 5/16'' x 1/2 BSP Thread
- Pressure
- Temperature
- Dimensions
- tube 3/8″ x 1/2 thread BSP · tube 5/16″ x 1/2 thread BSP · tube 1/2″ x 3/4 thread BSP
Installation and commissioning
Check the clearance and bore size, secure the bulkhead fitting without deforming the panel and connect the properly prepared tube. Avoid having the tubing transmit loads to the fixing.
John Guest fitting guide
John Guest fitting guide
Manuals and downloads
Product FAQs
What is a bulkhead fitting used for?
To create a mechanically tidy transition through a panel.
What thread does it use?
BSP, depending on the variant.
Do all variants use the same tube?
No.
Do I need to measure the panel?
Yes, it is advisable to check space, access and geometry before installation.
Download the John Guest technical data sheet (PDF) · PM1208S, PI1212S, PI1216S
To create a mechanically tidy transition through a panel.
What thread does it use?
BSP, depending on the variant.
Do all variants use the same tube?
No.
Do I need to measure the panel?
Yes, it is advisable to check space, access and geometry before installation.
Download the John Guest technical data sheet (PDF) · PM1208S, PI1212S, PI1216S
Useful accessories and add-ons
Check the correct connections and sizes.