Application
Beverage, location, expected flow and installation type.
Emily Ferrari two‑lever bottle capper for 26/29 mm caps
19.00€ EUR
Skip directly to product information
Emily Ferrari two‑lever bottle capper for 26/29 mm caps
IB0176
19.00€ EUR
Import information for Monaco
Duties, import taxes and handling fees depend on the destination. Calculated amounts, where applicable, will be shown at checkout; customs or the carrier may collect charges that are not included.
Shipping calculated at checkout.
Pickup available at Install Beer S.L.
Usually ready in 4 hours
Homebrewing · Beer bottling
Emily Ferrari bottle capper for craft beer
The Emily Ferrari bottle capper is a manual two‑lever capper designed to close beer, cider or other fermented beverage bottles with crown caps. It is a practical tool for homebrewers who want to bottle with a firm, simple and repeatable seal.
Technical summary: Emily Ferrari two‑lever bottle capper for closing bottles with 26 and 29 mm crown caps. An essential tool for bottling craft beer at home, protecting natural carbonation and keeping the product sealed in a clean, practical and safe way.
Tool type Manual two‑lever capper for bottling.
Compatibility 26 mm and 29 mm crown caps.
Main use Capping of craft beer and fermented beverages.
SKU Install Beer IB0176
What is the Emily Ferrari bottle capper?
The Emily Ferrari capper, also known as the Emily Two‑Lever Capping Machine, is a bottling tool for applying crown caps to compatible bottles. Its two‑lever system distributes the capping force comfortably, making it easier to seal the bottle without the need for an electric machine or a bench capper.
It is a very common option in homebrewing, small batches, recipe trials, home beer making, cider, mead or other fermented beverages that are bottled with crown caps.
Main advantages for home beer bottling
Simple manual closure
The two‑lever system allows you to cap bottles manually, quickly and without electrical power. You just place the cap on the bottle mouth, position the capper and operate the levers evenly.
Compatible with 26 and 29 mm
The version with two interchangeable bell housings allows you to work with 26 mm and 29 mm crown caps, increasing compatibility with different bottle formats commonly used in craft beer and home production.
Compact format
Since it’s a portable hand capper, it takes up little space and can be easily stored together with the rest of the bottling equipment: caps, bottle filler, tubing, racking bucket, sanitizer, and bottles.
Ideal for small and medium batches
This tool is designed for domestic or small‑scale craft bottling of moderate volume. For repetitive, intensive or higher‑volume production, a bench capper may be more advisable.
Recommended applications
- Homebrewers who make beer at home and bottle their own recipes.
- Craft brewers who work with small batches, samples, or test runs.
- Cider, mead or fermented beverage makers who use bottles with compatible crown caps.
- Shops, workshops, or brewing courses where a simple manual tool is needed to demonstrate the bottling process.
- Users who reuse compatible bottles, as long as the neck is in good condition and accepts a crown cap.
Bottle capper compatibility
This capper is intended for glass bottles compatible with crown cap closure. Before buying, it is advisable to check the cap diameter, the condition of the bottle neck and the type of original closure.
| Compatible with | Bottles suitable for closure with 26 mm or 29 mm crown caps. |
|---|---|
| Compatible caps | 26 mm and 29 mm crown caps via interchangeable bell housings. |
| Common beverages | Craft beer, cider, mead and other fermented beverages bottled with a compatible crown cap. |
| Not compatible with | Screw caps, swing‑top or mechanical stoppers, corks, cans, wine capsules and closures not designed for crown caps. |
| Pre‑use check | Check that the bottle has no cracks, chips on the lip, deformations or wear that could prevent a safe seal. |
Install Beer tip: If you are going to bottle beer with a second fermentation in the bottle, always use bottles suitable for pressure, quality caps and a proper cleaning and sanitising routine before filling.
Technical specifications
| Product | Emily Ferrari bottle capper. |
|---|---|
| Brand | Ferrari Group. |
| Model | Emily Two‑Lever Capping Machine. |
| SKU Install Beer | IB0176. |
| Manufacturer reference | 17501 for version with two interchangeable bushings of 26 and 29 mm. |
| Type of actuation | Manual, via two levers. |
| Type of closure | Crown cap. |
| Cap diameters | 26 mm and 29 mm. |
| Caps / adapters | Includes two interchangeable bell housings for working with 26 mm and 29 mm crown caps. |
| Materials | Body made of technical plastic and neck‑gripping jaws in galvanised steel. |
| Power supply | Does not require electrical power. |
| Dimensions and weight | Data not provided. |
| Recommended use | Domestic bottling, homebrewing, production trials and small or medium‑sized batches. |
| Intensive professional use | For continuous high‑volume use, it is advisable to consider a bench capper or a more robust bottling solution. |
How to use the Emily Ferrari capper
-
Clean and sanitise the bottles.
Before filling, make sure the bottles are clean, sanitised and free from label remains, dirt or residue on the mouth. -
Select the right cap.
Use 26 mm or 29 mm crown caps depending on the type of bottle. Check that the bell housing installed in the capper matches the cap diameter. -
Fill the bottle leaving the correct headspace.
Avoid filling to the brim. Leave the appropriate headspace for the type of drink, carbonation and maturation process. -
Place the crown cap on the bottle.
Position the cap centered over the mouth of the bottle and hold the capper vertically. -
Operate both levers.
Lower both levers evenly until the cap is crimped onto the bottle neck. -
Check the seal.
Visually check that the crown cap is properly seated, with no abnormal deformation or tilt.
Maintenance and cleaning
The Emily bottle capper requires only simple maintenance, but it should be kept clean and dry to extend its service life and avoid indirect contamination during bottling.
- Clean off beer, sugar, wort or moisture residues after each bottling session.
- Dry thoroughly before storing to prevent rust or dirt build‑up on the metal parts.
- Periodically check the condition of the bell housings and the neck‑gripping jaws.
- Do not force the seal if the bottle does not fit correctly.
- Store in a dry, clean place protected from impacts.
Usage limits and recommendations before buying
Check your bottles
Not all bottles work with all cappers. Make sure your bottles are designed for crown caps and that the neck allows the jaws to grip correctly.
Does not replace a professional line
For intensive bottling, commercial production or many hours of continuous work, a bench capper offers greater stability, precision and ergonomics.
Use quality caps
A poor‑quality cap can cause loss of carbonation, leaks or uneven seals. The seal depends both on the tool and on the bottle and cap used.
Avoid damaged bottles
Do not use bottles with impacts, cracks, damaged mouths or weakened glass. Pressure is applied to the neck of the bottle during capping.
Recommended accessories for bottling
For cleaner and more stable bottling, you can combine the bottle capper with other homebrewing and cleaning accessories.
- 26 mm or 29 mm crown caps, depending on the bottle format used.
- Compatible bottles for craft beer, preferably designed for pressure.
- Cleaning and sanitizing product for preparing bottles, tubes, and utensils.
- Bottle filler or racking cane to reduce splashing and oxidation.
- Fermentation or bottling bucket with tap, if you work with full batches.
Frequently asked questions about the Emily Ferrari bottle capper
Is it suitable for 26 mm crown caps?
Yes. The Emily Ferrari capper is compatible with 26 mm crown caps using the corresponding bell housing.
Is it also suitable for 29 mm caps?
Yes. This version includes two interchangeable bell housings so you can work with 26 mm and 29 mm crown caps.
Can I use it for homemade craft beer?
Yes. It’s a very suitable tool for homebrewers who bottle their homemade beer in bottles compatible with crown caps.
Does it need electricity?
No. It is a manual two‑lever capper, so it does not require an electrical connection or compressed air.
Is it suitable for any bottle?
No. It must be used with bottles compatible with crown caps and with a suitable neck so that the capper can grip correctly. It is not suitable for bottles with screw caps, swing‑tops, corks or other types of closure.
Is it recommended for intensive professional use?
For small batches, trials and home use it works very well. For intensive or repetitive production, a bench capper or professional bottling solution is usually more advisable.
Are you setting up your home bottling or dispensing system?
At Install Beer we can help you choose the right components to brew, bottle or serve your beer with more control: bottles, caps, Corny kegs, CO₂, taps, tubing, fittings, cleaning products and homebrewing accessories.
Shipping: check availability, lead time, and applicable cost before completing your order.
Terms: see the shipping, returns, and warranty pages for the applicable conditions.
Buy technical products with confidence
Confirm compatibility before purchasing
With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.
Connection
Thread, hose barb, push-fit connector, internal and external diameter.
Conditions
Pressure, gas, temperature, material and cleaning requirements.
Contents
Check which accessories, seals or adapters are included.