Application
Beverage, location, expected flow and installation type.
Lindr Kontakt 70 beer dispenser
CHF 812.43
Skip directly to product information
Lindr Kontakt 70 beer dispenser
PK0169
CHF 812.43
Import information for Switzerland
Duties, import taxes and handling fees depend on the destination. Calculated amounts, where applicable, will be shown at checkout; customs or the carrier may collect charges that are not included.
Shipping calculated at checkout.
Pickup available at Install Beer S.L.
Usually ready in 4 hours
Lindr · Kontakt 70 · 2 taps · CO2
Lindr Kontakt 70 portable dispenser for two beverages with high performance
The Lindr Kontakt 70 is a portable dry cooler with 2 taps and 70 l/h continuous output, designed to serve beer and other cold drinks with professional performance, compact format and quick 3/8 connection in environments such as events, temporary bars and light hospitality.
This model does not include an integrated air compressor. To operate correctly it needs Compatible coupler or couplers and a external pressure source adapted to the installation.
What this product offers
The Lindr Kontakt 70 is a clear step above compact coolers aimed at domestic use or small events. Lindr presents it as a machine for those who need high performance in a portable cooler, capable of serving up to 140–180 perfectly chilled drinks per hour according to the manufacturer, while maintaining portable dimensions and reasonably quick setup.
Its proposition is an especially good fit for restaurants, bars, small festivals, pop-up bars, caterers, temporary bars, large-format garden parties, professional events and light hospitality. The two-tap version allows you to work with two independent beverages, which is very useful when you need two references or a more flexible service flow.
On the technical side, it combines a continuous output of 70 l/h, a maximum of 90 l/h, a thermal block with 1.2 litres of beverage, a continuously adjustable thermostat, taps with compensator and a fully stainless steel structure. Install Beer also supplies it with 4 metres of beer line (2 + 2) and the necessary John Guest connectors to make commissioning easier.
Continuous performance
70 l/h for stable service on two lines.
Maximum capacity
90 l/h at 0 °C / TK 45 °C.
Settings
2 taps and 2 independent cold drinks.
Integrated compressor
No; it requires compatible external pressure.
Beverage connection
Speedfit 9.5 mm (3/8").
Thermal block
1.2 litres of beverage in the cooling block.
Format
27 kg portable unit with top handles.
Important detail
Can be set up with 1 or 2 kegs and run on CO₂ or an external compressor according to the installation layout.
Main features
2 taps for 2 cold drinks
Allows you to work with two independent lines in a single unit, ideal for dual reference and greater service flexibility.
70 l/h continuous and 90 l/h maximum
A clearly professional range to handle intensive service at a temporary bar, event, or small venue.
Cold beer in 5–8 minutes
The current Install Beer datasheet indicates cold drink ready in the cooling block a few minutes after switch‑on.
1.2-litre cooling block
Provides thermal stability and helps maintain good flow rate and consistent service.
Taps with compensator
The manufacturer highlights the continuous flow control, useful for fine-tuning service and beverage behavior.
3/8 quick-connect fittings
They speed up assembly and disassembly of beverage lines in portable or temporary installations.
Continuously adjustable thermostat
It allows you to fine-tune the serving temperature according to the drink, environment and pace of work.
Green Line with R290
Uses R290 refrigerant within Lindr’s Green Line architecture.
Robust stainless‑steel structure
The chassis and coils are made of stainless steel, with a hygienic focus and long service life.
Technical specifications
| Specification | Detail confirmed |
|---|---|
| Brand | Lindr |
| Model | KONTAKT 70 NEW GREEN LINE |
| SKU | PK0169 |
| MPN | KCH 01629 |
| Equipment type | Portable dry beer and beverage dispenser / cooler, 2 taps |
| Number of taps | 2 |
| Number of cold drinks | 2 |
| Maximum capacity | 90 l/h |
| Continuous performance | 70 l/h |
| Thermal gradient ΔT | 10 °C |
| Compressor power | 1/3 HP · 860 W |
| Electrical power | 483 W |
| Current draw | 2.10 A |
| Power supply | 220-240V 50Hz~1 |
| Integrated air compressor | No |
| Integrated air pressure | Not applicable |
| Coil length | 2 x 14.0 m |
| Coil diameter | 7 x 8 mm |
| Beverage volume in the cooling block | 1.2 L |
| Beverage connection | Speedfit 9.5 mm (3/8") |
| Air connection | Not integrated in the base unit |
| Approximate dimensions | 493 x 240 x 444 mm according to commercial technical drawing |
| Net weight | 27.0 kg |
| Materials | Full stainless-steel structure and coils |
| Refrigerant | R290 |
| Finish | Stainless / Green Line |
| Standard supply contents | Thermostat, taps, tap wrench, drip tray and speed fittings. Install Beer adds 4 m of beer tubing (2 + 2) and the necessary John Guest connectors. |
| Customisable options | Choice of tap, beverage connection with stainless‑steel thread and power‑cable plug. The manufacturer indicates that the platform can be supplied with a single tap and a longer coil. |
| General compatibility | 3/8" beverage line, compatible coupler or couplers, and external pressure system using CO₂ or air compressor depending on the installation |
| Certification / regulations | The manufacturer states compliance with the latest Czech and European safety and hygiene standards |
Compatibility and use cases
The Kontakt 70 works with a 3/8" beverage outlet and is designed to serve two independent cold beverages. As it does not include an integrated air compressor, pressure must be provided externally. The Install Beer quick scheme includes configurations for 1 keg or 2 kegs, using either an external air compressor or CO₂, so the machine can be adapted to portable setups or temporary bars of varying complexity.
In practice, the system consists of unit + 3/8 tubing + correct coupler or couplers + external pressure source + keg or kegs. If you are going to work with two products, it is advisable to check very carefully the coupler compatibility and the behavior of each beverage so that both lines perform stably.
Its natural scenarios are restaurants, bars, small festivals, pop-up mobile bars, catering services, temporary bars, tastings, professional events and light hospitality. It can also fit into a demanding home environment when you want a machine clearly superior to a compact range.
Installation and considerations before buying
- Confirm whether you will work with 1 or 2 kegs: the machine allows both configurations, but the layout and required accessories change.
- Check the correct coupler or couplers: each keg needs the extractor coupler compatible with its valve and system.
- Remember that it does not have an integrated compressor: you must define whether the installation will work with CO₂ or with an external air compressor.
- Check the line size: the beverage outlet is 3/8", so it is advisable to check tubes, fittings and adapters before installing.
- Insertion into quick connector: the Install Beer diagram shows an approximate insertion of 20 mm of tube into the quick connector for a correct coupling.
- Check the usable space: although still portable, this is a high-performance unit that requires a stable surface and space for ventilation and hose routing.
- Power supply: requires a 220-240V 50Hz~1 outlet and a safe installation.
- Type of use: if the service is going to be very intensive or continuous, it is worth considering whether this portable range is the most suitable or whether a fixed installation or higher-capacity solution would be preferable.
Recommended maintenance and use
In a two-line, high-flow unit, actual performance depends on line cleanliness, condition of couplers, correct pressure, ventilation, temperature and condition of connectors and taps. Any imbalance between circuits can affect service, flow rate and the final quality of the beverage.
It is also advisable to keep the ventilation area clean and always follow the manufacturer’s instructions for use and maintenance of the refrigeration circuit, since the unit works with R290. If it is used frequently at events or in professional service, it is recommended to establish a clear routine for cleaning, checking gaskets, and inspecting quick‑connect fittings.
Frequently asked questions
Does the Lindr Kontakt 70 have a built-in air compressor?
No. The manufacturer states that the Kontakt 70 NEW GREEN LINE does not include an air compressor, so pressure must be provided externally with CO₂ or a compatible compressor.
How many taps and how many drinks can it serve?
The usual configuration in this spec sheet works with 2 taps and 2 cold beverages, allowing you to serve two independent lines.
What do I need to get it up and running?
You need the unit, compatible tubing, the correct head or heads, a keg or kegs, and an external pressure source. Install Beer adds 4 metres of beer line and the necessary John Guest connectors.
Can it be connected to 1 keg or to 2 kegs?
Yes. The quick schematic provided by Install Beer shows setups for 1 keg or 2 kegs, with either an external air compressor or CO₂.
How long does it take to chill the drink?
The current Install Beer spec sheet indicates cold beer ready in the cooling block approximately 5–8 minutes after switching on.
Is it also suitable for drinks other than beer?
Yes, the manufacturer mentions beer and other beverages. Even so, before buying it is advisable to check pressure, circuit, product and cleaning compatibility according to the specific drink.
Downloadable
Shipping: check availability, lead time, and applicable cost before completing your order.
Terms: see the shipping, returns, and warranty pages for the applicable conditions.
Buy technical products with confidence
Confirm compatibility before purchasing
With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.
Connection
Thread, hose barb, push-fit connector, internal and external diameter.
Conditions
Pressure, gas, temperature, material and cleaning requirements.
Contents
Check which accessories, seals or adapters are included.