Application
Beverage, location, expected flow and installation type.
Lindr Kontakt 40/K beer dispenser
772.24€ EUR
Skip directly to product information
Lindr Kontakt 40/K beer dispenser
PK0171
772.24€ EUR
Import information for Kosovo
Duties, import taxes and handling fees depend on the destination. Calculated amounts, where applicable, will be shown at checkout; customs or the carrier may collect charges that are not included.
Shipping calculated at checkout.
Pickup available at Install Beer S.L.
Usually ready in 4 hours
Lindr · Kontakt 40/K · 2 taps · air compressor
Portable Lindr Kontakt 40/K dispenser with integrated compressor for two drinks
The Lindr Kontakt 40/K is a portable dry cooler with 2 taps, integrated air compressor and continuous 40 l/h output, designed to serve beer and other cold drinks with quick setup, compact format and performance suitable for demanding home use, events and light professional use.
Includes air compressor automatically set to 2.8–3.2 bar, but it still needs compatible couplers, a suitable keg or kegs and a correct configuration of tubing and connections.
What this product offers
The Lindr Kontakt 40/K is designed for those who need a portable 2‑tap beer tower with built‑in compressor, capable of going beyond basic home use without yet moving to a fixed solution or a much heavier unit. Lindr defines this series as a combination of the compactness of the Pygmy range and the performance and technologies of its professional coolers for restaurants and pubs.
That combination makes a lot of practical sense. It lets you serve two independent chilled drinks, with a continuous output of 40 litres per hour and a maximum capacity of 50 l/h, while maintaining a portable format with top handles. It is a very well-positioned unit for parties, events, garden parties, tastings, drink corners, temporary bars, light catering, and small or seasonal hospitality businesses.
In addition, it offers real operational advantages: built-in compressor, molecular filter, precise temperature control, taps with compensator to control the flow rate, quick connectors and a full stainless steel construction. Install Beer adds 4 metres of beer tube, 4 metres of gas/air tube and the necessary John Guest connectors to make commissioning easier.
Continuous performance
40 l/h for stable service with two lines or two drinks.
Maximum capacity
50 l/h at 0 °C / ΔT 45 °C.
Integrated compressor
Yes, with automatic pressure from 2.8 to 3.2 bar.
Settings
2 taps and 2 independent cold drinks.
Beverage connection
Speedfit 9.5 mm (3/8").
Air connection
Speedfit 8 mm (5/16").
Cooling block
1.2 litres of beverage in the cooling block.
Important detail
It can be connected to 1 or 2 kegs, with built‑in air or with CO₂ depending on the installation.
Main features
Built-in air compressor
It simplifies many portable setups and avoids always having to rely on an external cylinder in simple configurations.
2 taps for 2 cold drinks
It allows you to work with two independent lines, very useful for events, tastings, or service with two different products.
40 l/h continuous and 50 l/h maximum
Sufficient capacity to serve approximately 80–100 cold drinks per hour according to the manufacturer.
1.2-litre cooling block
It provides thermal stability and helps maintain a uniform beverage flow.
Air molecular filter
Lindr equips these models with a built-in compressor with molecular filter to protect the quality of the beverage served.
Taps with compensator
The manufacturer highlights continuous flow control via taps with compensator.
3/8 and 5/16 quick-connect fittings
They make it easier to connect the beverage circuit and air line in temporary or mobile installations.
Universal use
It can also be used in combination with a dispense tower or dispensing column.
Robust stainless-steel structure
Full stainless-steel chassis and coils, with a hygienic focus and long service life.
Technical specifications
| Specification | Detail confirmed |
|---|---|
| Brand | Lindr |
| Model | KONTAKT 40/K NEW GREEN LINE |
| SKU | PK0171 |
| MPN | KCH 01627 |
| Equipment type | Portable dry beer and beverage dispenser / cooler with integrated air compressor |
| Number of taps | 2 |
| Number of cold drinks | 2 |
| Maximum capacity | 50 l/h |
| Continuous performance | 40 l/h |
| Thermal gradient ΔT | 10 °C |
| Compressor power | 1/5 HP · 510 W |
| Electrical power | 391 W |
| Current draw | 1.70 A |
| Power supply | 220-240V 50Hz~1 |
| Integrated air compressor | Yes |
| Air compressor pressure | Automatic 2.8–3.2 bar |
| Coil length | 2 x 14.0 m |
| Coil diameter | 7 x 8 mm |
| Beverage volume in the cooling block | 1.2 l |
| Beverage connection | Speedfit 9.5 mm (3/8") |
| Air connection | Speedfit 8 mm (5/16") |
| Approximate dimensions | 478 x 220 x 435 mm according to the commercial technical drawing |
| Net weight | 29.0 kg |
| Materials | Full stainless-steel structure and coils |
| Refrigerant | R290 |
| Finish | Stainless / Green Line |
| Standard supply contents | Thermostat, taps, tap wrench, drip tray and speed fittings. Install Beer adds 4 m of beer tubing (2 + 2), 4 m of gas/air tubing (2 + 2) and the necessary John Guest connectors. |
| Customisable options | Choice of tap, stainless-steel thread for beverage, stainless-steel thread for air, and power cable plug |
| General compatibility | 3/8" beverage line, 5/16" air line, compatible coupler or couplers, and keg or kegs suited to the system |
| Protection / safety | The manual indicates protection rating IP21 and use only for the purposes specified by the manufacturer |
| Certification / regulations | The manufacturer states compliance with the latest Czech and European safety and hygiene standards |
Compatibility and use cases
The Kontakt 40/K works with a 3/8" beverage outlet and a 5/16" air outlet, and is designed to serve two independent cold beverages. Its natural setup is unit + beverage lines + integrated compressor air line + compatible keg coupler or couplers + keg or kegs. Install Beer also provides quick layouts for working with 1 keg or 2 kegs, using either an air compressor or CO₂.
This gives you very practical flexibility in environments where quick setup and teardown are important: advanced home, garden parties, small events, tastings, drink corners, catering, temporary bars, fairs and light or seasonal hospitality. Lindr presents it as a unit capable of covering small foodservice operations while at the same time meeting high demands for domestic and commercial service.
In addition to beer, the manufacturer refers to beer and other beverages. Even so, before buying it is advisable to confirm the real compatibility of the beverage with the circuit, pressure, cleaning system and type of service planned.
Installation and considerations before buying
- Confirm whether you will be working with 1 or 2 kegs: the equipment can be set up for one or two products, but the installation layout and the number of heads required will change.
- Check the correct head or heads: you need the head model that is compatible with each keg or beverage system.
- Check connections and sizes: beverage in 3/8" and air in 5/16". If your setup uses other sizes, you’ll need a compatible adapter.
- Consider whether you will use the built-in compressor or work with CO₂: the unit includes a compressor, but depending on the beverage, serving time or project, another configuration may be preferable.
- Check the usable space: although it’s still portable, it’s a more serious unit in terms of size and weight. You must plan for a stable surface, ventilation, and hose routing.
- Quick connectors: Install Beer shows in its diagram an approximate insertion of 20 mm of tubing into the quick connector for correct coupling.
- Power supply and safety: requires 220–240 V 50 Hz~1 and the manual reminds you to check voltage and frequency before connecting the unit.
- Proper use: the manual states that the equipment is intended for chilling and serving beverages, and must not be used for purposes other than those indicated by the manufacturer.
Recommended maintenance and use
As with any dispensing system, actual performance depends on line cleanliness, condition of the coupler, correct pressure, temperature, ventilation, and condition of connectors and taps. In a two‑line unit this is even more important, because any imbalance between circuits can affect service and flow rate.
The manufacturer itself emphasizes the importance of maintaining the quality of the beverage served, and that is why these models with built-in compressor integrate a molecular filter. It is also important to follow the instructions in the manual regarding disconnecting the power before cleaning or maintenance and handling the refrigeration circuit, since it uses R290.
Frequently asked questions
Does the Lindr Kontakt 40/K have a built‑in air compressor?
Yes. This is one of its key differences: it includes a built‑in air compressor with automatic pressure of 2.8–3.2 bar.
How many taps and how many drinks can it serve?
The usual configuration for this unit works with 2 taps and 2 cold beverages, allowing you to serve two independent lines.
Does it include the keg coupler?
The visible Install Beer datasheet does not state that it is included. It does list 4 metres of beer tubing, 4 metres of gas/air tubing and the necessary John Guest connectors, so it’s advisable to choose the compatible keg coupler separately if you’re not buying a complete pack.
What connections does it use?
The beverage connection is 9.5 mm (3/8") and the air connection is 8 mm (5/16"), both with Speedfit quick connector.
Can it be connected to 1 keg or to 2 kegs?
Yes. The quick diagram provided by Install Beer shows configurations for 1 keg and 2 kegs, with both air compressor and CO₂.
What type of use is it best suited for?
Fits very well in demanding homes, gardens, small events, tastings, light catering, temporary bars and small hospitality businesses that need a portable two-line solution.
Downloadable
Shipping: check availability, lead time, and applicable cost before completing your order.
Terms: see the shipping, returns, and warranty pages for the applicable conditions.
Buy technical products with confidence
Confirm compatibility before purchasing
With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.
Connection
Thread, hose barb, push-fit connector, internal and external diameter.
Conditions
Pressure, gas, temperature, material and cleaning requirements.
Contents
Check which accessories, seals or adapters are included.