Manorreductor de un cuerpo-Install Beer

Single-body regulator

Direct (fixed arm) / 3/8'' John Guest quick-connect fitting
Gs. 434.794 PYG tax excl.
Skip directly to product information
Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
  • Manorreductor de un cuerpo-Install Beer
Single-body regulator

Single-body regulator

IB0391
Gs. 434.794 PYG tax excl.
Import information for Paraguay Duties, import taxes and handling fees depend on the destination. Calculated amounts, where applicable, will be shown at checkout; customs or the carrier may collect charges that are not included.
Shipping calculated at checkout.
Bottle connection
Outlet from pressure regulator

Pickup available at Install Beer S.L.

Usually ready in 4 hours

Single-body regulator

Direct (fixed arm) / 3/8'' John Guest quick-connect fitting

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656

Single-outlet CO2 gas cylinder regulator

Single-body CO2 gas pressure reducer for perfect carbonation in every beer service. With safety valve and thermal insulating cap, this regulator ensures precise, constant pressure, preventing over-carbonation or flat beer. Robust construction and food-grade approved coating.

Single-body pressure regulator or gauge that regulates the pressure of the gas cylinder (high-pressure source) and connects it to the beer keg, attached to the keg valve (reduces the pressure). When a pressure is recommended it is usually specified. The gas regulator has a manual adjustment screw or knob to regulate the amount of pressure supplied to the keg.

The gas regulator is vitally important for maintaining the correct CO2 level in beer. Too much CO2 can add excess CO2 to the beer and cause foaming and over-carbonation issues, while too little CO2 pressure can release the CO2 from the beer itself, resulting in flat beer with little or no gas/head.

NSF61-certified food-grade galvanic coating – SK approval.

Stamped brass body with built-in safety valve and PTFE sealing gasket.

High-pressure valve interior constructed in AISI 300 stainless steel.

Thermal-insulating synthetic resin cap that improves and optimizes regulator performance by preventing freezing and avoiding annoying condensation.

High-pressure gauge: 0–250 bar

Low-pressure gauge: 0–10 bar (factory set to 7 bar)

Available outlets: 8mm metal barb / 3/8" tube quick connection

Dimensions: 21.8w-14fil.x1″ CH.30 - 250x200x100 mm

The hose for the pressure regulator is not included; it comes standard with a fixed arm. A version with hose is available as an extra.

Shipping: check availability, lead time and applicable cost before completing your order.

Terms: see the shipping, returns and warranty pages for the applicable conditions.

Buy technical products with confidence

Confirm compatibility before purchasing

With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.

01

Application

Beverage, location, expected flow and installation type.

02

Connection

Thread, hose barb, push-fit connector, internal and external diameter.

03

Conditions

Pressure, gas, temperature, material and cleaning requirements.

04

Contents

Check which accessories, seals or adapters are included.

Related products