Application
Beverage, location, expected flow and installation type.
Lindr Pygmy 25 beer dispenser
Skip directly to product information
442.62€
excl. VAT
535.57€
VAT incl.
EU businesses with a valid VAT number may qualify for a VAT-exempt intra-Community supply, subject to validation and applicable conditions. Shipping calculated at checkout.
Lindr Pygmy 25 beer dispenser
PK0166
Shipping calculated at checkout.
Pickup available at Install Beer S.L.
Usually ready in 4 hours
Lindr · Pygmy 25 · 1 tap · CO2
Lindr Pygmy 25 portable dispenser for serving cold beer in a compact format
The Lindr Pygmy 25 is a portable beer cooler with 1 tap, without an integrated air compressor, designed to serve beer and other cold beverages in small spaces with professional performance, 3/8 quick connection and compact size for home, events and bar support.
Requires a compatible keg coupler and an external pressurisation system suited to the drink and the keg.
What this product offers
The Lindr Pygmy 25 is a portable single-line beer dispenser. Its compact design makes it easy to transport and suitable for small spaces, temporary service or use as an additional unit at the bar.
It is suitable for home use, outdoor celebrations, small events, tastings and beverage service points. Bars and restaurants can use it when an additional draught line is needed.
Operationally, its real value lies in combining compact size, 25 l/h continuous output, 35 l/h maximum, 3/8 quick connection and mechanical thermostat in a stainless-steel chassis with a stainless-steel coil. It does not have a built-in air compressor, so pressurisation must be handled externally depending on the system chosen.
Continuous output 25 l/h for stable single-line service.
Maximum capacity 35 l/h at 0 ºC / TK 45 ºC.
Configuration 1 tap and 1 cold drink, without an integrated air compressor.
Beverage connection Speedfit 9.5 mm (3/8").
Format Portable, compact unit with top handle.
Refrigerant Green Line with R290.
Temperature control Mechanical thermostat in the range of 2 °C to 8 °C.
Important detail Requires compatible external coupler and pressurization.
Main features
Compact portable format It makes transport, temporary setup and use easier in spaces where a larger cooler will not fit.
1 tap with 25 l/h continuous output It provides single-line service for home use and events, allowing cooling recovery pauses between batches of pours.
Maximum 35 l/h It can handle reasonable service peaks while keeping the unit size compact.
3/8" quick connection Works with 9.5 mm Speedfit for a clean, agile connection of the beverage circuit.
Mechanical thermostat It allows you to set the operating temperature between 2 °C and 8 °C depending on the beverage, environment and service needs.
Stainless-steel frame and coil Improves hygiene, durability and resistance for repeated, technical use.
Green Line with R290 Uses R290 refrigerant and a Green Line range architecture focused on efficiency and lower consumption.
Dispense-tower compatible The manufacturer indicates that it can also be used in combination with a dispense tower.
Cooled tap The cooled tap helps maintain the serving temperature better, especially in hot environments.
Technical specifications
| Specification | Confirmed detail |
|---|---|
| Brand | Lindr |
| Model | PYGMY 25 NEW GREEN LINE |
| SKU | PK0166 |
| MPN | KCH 01623 |
| Equipment type | Portable beer and beverage dispenser / cooler, 1 tap |
| Number of taps | 1 |
| Number of cold beverages | 1 |
| Maximum capacity | 35 l/h |
| Continuous output | 25 l/h |
| Temperature gradient ΔT | 10 ºC |
| Compressor power | 1/8 HP · 280 W |
| Electrical power | 299 W |
| Current | 1.3 A |
| Power supply | 220-240V 50Hz~1 |
| Integrated air compressor | No |
| Coil length | 11.5 m |
| Coil diameter | 7 x 8 mm |
| Beverage connection | Speedfit 9.5 mm (3/8") |
| Air connection | Not applicable on the base unit; pressurisation is external |
| Thermostat | Mechanical, range 2 °C to 8 °C |
| Maximum beverage inlet temperature | 25 °C |
| Refrigerant | R290 |
| Net weight | 15 kg |
| Approximate dimensions | 458 x 175 x 334 mm |
| Materials | Full stainless-steel structure and coils |
| Finish | Stainless steel / Green Line |
| Standard supply contents | Tap, tap wrench, drip tray and quick connectors. Install Beer also includes 2 m of beer tubing and the necessary John Guest connectors. |
| Customisation options | Choice of tap according to manufacturer |
| General compatibility | Use with 3/8" beverage line, compatible keg coupler and external pressurisation system |
| Certification / standards | The manufacturer states compliance with the latest Czech and European safety and hygiene standards. |
Compatibility and use cases
This unit works as a portable single-line cooler and its beverage connection is 9.5 mm (3/8") Speedfit. To assemble a functional system you need, in addition to the unit, a coupler compatible with your keg and suitable external pressurisation. The manual includes connections with a CO₂ mini-pump and other external pressurisation options; therefore, review the configuration carefully before purchasing.
It works with beer kegs and other cold-drink applications as long as the circuit, gas and pressure are compatible with the beverage. The manufacturer also states that it can be used with a dispense tower, broadening its use for beverage service points, temporary bars and compact setups.
Typical scenarios include home, celebrations, garden, tastings, activations, small events, bar backup and mobile service. If you need a more integrated system or a built-in air compressor, consider a K version or another range.
Installation and considerations before buying
- Check the keg type: confirm which keg coupler you need for your keg or beverage system.
- No built-in air compressor: pressurisation must be handled externally with a compatible system.
- Check the beverage line: the unit uses a 3/8" connection, so check tubing, fittings and adapters before installation.
- Check space and footprint: allow enough room for the unit, tap, tray and hose bend radii.
- Power supply: requires 220-240V 50Hz~1 and a safe electrical installation compliant with local regulations.
- Inlet temperature: the beverage must not enter above 25 °C.
- Non-alcoholic beverages: the manual recommends not exceeding thermostat level 5 to avoid freezing in the line.
- Fixed or professional installation: if integrating it into a bar, with a tower or external gas, check compatibility and circuit layout with appropriate technical criteria.
Recommended maintenance and use
As with any dispensing system, performance does not depend on the cooler alone. Keep the tap, coupler, beverage line and connectors clean, and avoid tapping the keg with dirty adapters. Do not disconnect tubing under pressure; when using quick connectors, release the locking ring correctly before removing the tube.
For regular use, check the thermostat, external service pressure and connection condition. The unit uses R290, so follow the manufacturer documentation for installation, inspection and servicing. If the power cable is damaged, do not operate the unit until it has been replaced by qualified personnel or an authorised service centre.
Frequently asked questions
Does the Lindr Pygmy 25 have an integrated air compressor?
No. This model does not include an air compressor, so pressurisation must be handled externally.
What do I need to get it running?
You need the unit, a keg coupler compatible with your keg, the appropriate beverage line and a compatible external pressurisation system. Install Beer also includes 2 m of tubing and the necessary John Guest connectors.
Is the keg coupler included?
No. Choose the correct coupler according to the keg and beverage.
Is it only for beer?
Not necessarily. The manufacturer refers to beer and other beverages, but pressure, product and circuit compatibility must be checked. For non-alcoholic beverages the manual recommends not exceeding thermostat level 5 to avoid freezing.
Is it suitable for home or small events?
Yes. It is well suited to home, garden, celebrations and small events where a compact single-line machine with good performance is required.
Can it be connected to a dispense tower?
Yes. The manufacturer states that it can be used with a dispense tower, provided the complete installation and compatibility are checked.
Serving pace and cooling recovery
Important: these dispensers need time to recover their cooling capacity between batches of pours. They are not intended for leaving the tap open and filling glasses continuously without limit. If the pouring rate exceeds the cooling capacity, the beverage will become progressively less cold and may run warm because the unit has not had time to cool the beverage flowing through the coil. Stop pouring and allow the unit to recover; the pause is usually a few minutes, depending on the model, beverage inlet temperature and ambient temperature. This also applies to higher-capacity models and when using both taps simultaneously.
This dispenser uses dry cooling: the beverage flows through a coil in contact with a refrigerated thermal block, unlike an ice-bank cooler. Pouring several glasses in succession uses the available cooling reserve, and a pause may be needed for the unit to recover its temperature. Serving pace depends on beverage inlet temperature, ambient temperature, serving volume and thermostat setting.
For models 20 and 25, we recommend a measured serving pace. As practical guidance from Install Beer, after pouring two glasses in succession, you may need to wait about two minutes for cooling recovery. This is not a fixed interval or a performance guarantee: adjust it to glass size and operating conditions.
Shipping: check availability, lead time, and applicable cost before completing your order.
Terms: see the shipping, returns, and warranty pages for the applicable conditions.
Buy technical products with confidence
Confirm compatibility before purchasing
With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.
Connection
Thread, hose barb, push-fit connector, internal and external diameter.
Conditions
Pressure, gas, temperature, material and cleaning requirements.
Contents
Check which accessories, seals or adapters are included.