{"product_id":"kegerator-grifo-dispensador-bebida","title":"Kegerator (installation kit)","description":"\u003ch2\u003eKegerator kit to install one or two beer taps in a fridge\u003c\/h2\u003e\u003cp\u003eTurn a compatible fridge into a draft beer system with this \u003cstrong\u003einstallation Kegerator kit\u003c\/strong\u003e. It’s available for \u003cstrong\u003e1 or 2 taps\u003c\/strong\u003e and includes the front plate, tray, taps, tubing and connections needed to set up the service point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant: the fridge is not included.\u003c\/strong\u003e The keg must remain refrigerated inside a suitable fridge or cold room.\u003c\/p\u003e\u003ch3\u003eWhat the kit includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKegerator stainless steel plate.\u003c\/li\u003e\n\u003cli\u003eDrip tray\/drip pan.\u003c\/li\u003e\n\u003cli\u003eAlpha L55 tap with compensator and 3\/8\" John Guest connection.\u003c\/li\u003e\n\u003cli\u003eLupulus II 3\/8\" beer line: 1 m in 1‑tap version \/ 2 m in 2‑tap version.\u003c\/li\u003e\n\u003cli\u003ePoly SK 3\/8\" air or gas tube: 2 m \/ 3 m depending on version.\u003c\/li\u003e\n\u003cli\u003eJohn Guest equal T 3\/8\" connector for gas or air supply in the corresponding version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional keg coupler\u003c\/strong\u003e with 3\/8\" John Guest outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003cth\u003ePlate width\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003cth\u003eTray\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 tap\u003c\/td\u003e\n\u003ctd\u003e21 cm\u003c\/td\u003e\n\u003ctd\u003e40 cm\u003c\/td\u003e\n\u003ctd\u003e21 × 16 × 2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 taps\u003c\/td\u003e\n\u003ctd\u003e38 cm\u003c\/td\u003e\n\u003ctd\u003e40 cm\u003c\/td\u003e\n\u003ctd\u003e36 × 16 × 2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eIn both versions, the center of the tap hole is 33 cm high. In the two‑tap version the holes are 18 cm apart.\u003c\/p\u003e\u003ch3\u003eWhat you need in addition to the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA fridge or cold room with enough space for the keg.\u003c\/li\u003e\n\u003cli\u003eThe keg and the \u003cstrong\u003ecompatible coupler\u003c\/strong\u003e with its valve.\u003c\/li\u003e\n\u003cli\u003eA pressure source: usually CO₂ or, in compatible systems such as certain bag‑in‑keg formats, compressed air.\u003c\/li\u003e\n\u003cli\u003eRegulator and gas accessories suitable for the system used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eThe surface where the tap is installed must be drilled with a hole of approximately \u003cstrong\u003e22 mm\u003c\/strong\u003e. You must also prepare a pass-through for the air\/CO₂ tube of approximately \u003cstrong\u003e10 mm (3\/8\")\u003c\/strong\u003e. Before drilling a fridge, check that the chosen area does not contain cooling circuits, wiring or other internal elements.\u003c\/p\u003e\u003ch3\u003eWhich keg coupler do I need?\u003c\/h3\u003e\u003cp\u003eIt depends on the keg valve: Sankey S, D, U, A, G, M, KeyKeg or other systems are not interchangeable. If you indicate the brand or type of keg you are going to use, Install Beer can help you select the correct coupler.\u003c\/p\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes it include the fridge?\u003c\/strong\u003e\u003cbr\u003eNo. This product is the installation kit to turn a compatible fridge into a Kegerator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fit two taps?\u003c\/strong\u003e\u003cbr\u003eYes. There is a specific two‑tap variant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it include the keg coupler?\u003c\/strong\u003e\u003cbr\u003eIt’s optional, because it must be chosen according to the keg valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need CO₂?\u003c\/strong\u003e\u003cbr\u003eIn most conventional beer systems, yes. The correct pressure and gas depend on the product, temperature and type of keg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install it myself?\u003c\/strong\u003e\u003cbr\u003eIt’s possible with the right tools, but before drilling you must check that there are no refrigerant lines or wiring in the chosen area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/drive.google.com\/folderview?id=0B5oG0aBZ-BsUbGpLRWh1aThNd1k\u0026usp=sharing\" title=\"Galería de Kegerators\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView Kegerator installation gallery\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Aplimet","offers":[{"title":"1 Tap","offer_id":8674181381,"sku":"PK0028","price":36754.0,"currency_code":"JPY","in_stock":true},{"title":"2 Taps","offer_id":8674155269,"sku":"PK0029","price":58649.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0339\/9513\/files\/Kegerator-kit-de-instalacion.webp?v=1697720621","url":"https:\/\/installbeer.com\/en-jp\/products\/kegerator-beer-tap-dispenser","provider":"Install Beer","version":"1.0","type":"link"}