Adaptador Hembra 3/8 x 1/4 (Rosca NPTF)-Install Beer

Female Adapter 3/8 x 1/4 (NPTF Thread)

Rs. 282.33 INR excl. GST
Skip directly to product information
Adaptador Hembra 3/8 x 1/4 (Rosca NPTF)-Install Beer
  • Adaptador Hembra 3/8 x 1/4 (Rosca NPTF)-Install Beer
  • Adaptador Hembra 3/8 x 1/4 (Rosca NPTF)-Install Beer
  • Adaptador Hembra 3/8 x 1/4 (Rosca NPTF)-Install Beer
  • Adaptador Hembra 3/8 x 1/4 (Rosca NPTF)-Install Beer
  • Adaptador Hembra 3/8 x 1/4 (Rosca NPTF)-Install Beer
  • Adaptador Hembra 3/8 x 1/4 (Rosca NPTF)-Install Beer
  • Instrucciones de uso de conectores John Guest
Female Adapter 3/8 x 1/4 (NPTF Thread)

Female Adapter 3/8 x 1/4 (NPTF Thread)

IB0037
Rs. 282.33 INR excl. GST
Import information for India Duties, import taxes and handling fees depend on the destination. Calculated amounts, where applicable, will be shown at checkout; customs or the carrier may collect charges that are not included.
Shipping calculated at checkout.

Pickup available at Install Beer S.L.

Usually ready in 4 hours

Female Adapter 3/8 x 1/4 (NPTF Thread)

Install Beer S.L.

Pickup available, usually ready in 4 hours

Carrer de Joaquim Valls 109
Local
08042 Barcelona
B
Spain

+34933464656

John Guest female adapter 3/8" × 1/4 NPTF

Fitting to connect 3/8" (9.5 mm) tube to a component with a 1/4 NPTF thread. It enables a direct transition between push-fit tubing and threaded connection.

Compatibility

The tube must be 3/8" and the component must use a 1/4 NPTF thread. Check the equipment identification before assembly.

Application

It can be used in compatible dispense systems, including setups where it is necessary to adapt a tube line to an NPTF connection.

Installation

Work with no pressure in the line, cut the tube square, insert it fully and assemble the thread without cross-threading. Check for leaks before putting into service.

Frequently asked questions

Is it suitable for 3/8" tube?
Yes, 9.5 mm outside diameter.

Is it BSP?
No, the spec sheet refers to NPTF.

Does it need a clamp on the push-fit side?
The tube connection is made using the fitting’s push-fit system.

What should I check if the tube won’t go in?
Actual outside diameter, cut of the end, and absence of deformation.

Shipping: check availability, lead time and applicable cost before completing your order.

Terms: see the shipping, returns and warranty pages for the applicable conditions.

Buy technical products with confidence

Confirm compatibility before purchasing

With dispensing components, a few millimetres, a thread or the beverage type can determine compatibility. Review the description and contact us when you do not have all the details.

01

Application

Beverage, location, expected flow and installation type.

02

Connection

Thread, hose barb, push-fit connector, internal and external diameter.

03

Conditions

Pressure, gas, temperature, material and cleaning requirements.

04

Contents

Check which accessories, seals or adapters are included.

Related products